3-11-2024 See these two 2011 Liliputing and TechCrunch articles, which were partly the inspiration for this project: https://liliputing.com/pixel-qi-suggests-low-power-tablets-could-be-powered-by-1w-solar-panels/(6-3-11) https://techcrunch.com/2011/06/04/first-solar-powered-laptop/ (6-4-11)...
Licencing and IPAll codes/scripts are hosted at: www.MichaelRatcliffe.com/projects[Will be updated before the 22/9/2015]Everything is released as Copy Left, For more info:>LicencesProject Prefaceabout me: Graduated with a Degree in Mechanical Engineering...
Next we will prepare the water flow. I decided to use this combination of pump and tubing, because they fit without an adapter. Other combinations work also. Clear tubbing isnt the best solution, because algae will grow inside the tubes. you can prevent...
Started to debug the code. So far the SNES controller reading is fine, operating mode selection is fine, Left port driving is fine.For this project I have used variables to store the state of the input controls and for the output data to interface with...
The boards have finally arrived. The past 12 months have been a mixture of waiting for parts, software design for FPGA IP Cores (harder than expected) and communicating to a thankfully perceptive PCBWay for fixing possible part conflicts with my BOM....
Crazy cool finding for the Kria SOM: if you save the settings from simulation of another GTH capable Zynq MPSOC (Like say the ZCU104 or ZCU106), you can load the GTH on the Kria SOM with these settings via dynamic reconfiguration, and have it working...
Today I successfully tested assembled 4-bit ALU (previous revision of NEDONAND-4 board with four NEDONAND-1 connected). In order to do this I slightly modified the board to connect nedoCPU-16 with it: Then I wrote a simple program in PIC assembler that...
1. Datasheet.So thanks to the datasheet, we know now that Lunii chipset is based on a 16bit DSP core and I also found out that the 10 pts connector is belonging to ICE-Debug (very known in the arduino/avr world) and not for UART or SWD.Unfortunately...
Dumped data the other day after we've had some wicked weather (leading into freezing temps again, of which I hope last night was the last)-=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.04.04 06:17:37 =~=~=~=~=~=~=~=~=~=~=~=0: 24 km - Thu Apr 1 2016 3:28:25...
The story so far... Update: Row scanning working.Known/working: Building and loading via JTAG new firmware into the main FPGA. This firmware is starting from scratch, we don't understand much yet about the default Barco firmware, although we've dumped...
Sunday, 13/08/2023, 10:55. I can't believe I'm saying this, but I think I will go back to the reversibly actuated artificial muscles. Yes, I know, I know, I just wasted so much time taking each single approach for their efficiency and now I'm throwing...
The Bankswitch cartridge implements the three most common schemes named F8, F6 and F4. The working of the bankswitches is depicted on the table below. Address -Address Lines-- Bankswitch/Bank selected 1 11 8K 16K 32K 2 1098 7654 3210 F8 F6 F4 $1FF0 0001...
The PWM has been in-place for quite some time (and is used for the 'cassette sound' feature that many games use), but I had never gotten around to implementing the Orchestra 80 support, even though it should be simple. Part of the reason was that...