I wanted to connect replacement LCD to the original LCD connector, with no "ugly hacks" like interfacing with VGA connector and other workarounds. The original LCD used 9-bit TTL RGB interface (3 pins for red, 3 pins for green, 3 pins for red), which...
Place View Count Followers Comments Skulls Project Author 1 32400 415 56 148 Bench Power Supply The Big One 2 19900 370 38 142 3D Printable Robot Arm Andreas Hoelldorfer 3 48300 273 112 120 Luka EV MW Motors 4 4600 101 20 114 Eye Controlled Wheelchair!...
Detecting and identifying a card As stated in an earlier log, the card insertion is detected by grounding the pin *CD. But this is not enough to make the scope believe he have a know card inside him. You need to indicate him what type of card was inserted....
I'm going to create a stand-alone PSoC project to use the PSoC to read SD cards. I'm going to start with the hardware defines for this project (which should leave the Z80 hardware pins unmolested) and just not download code. For the software piece, I...
Background If you have been following Hackaday for a while, you will have seen on numerous occasions the KENBAK-1, regarded by many as the first commercial personal computer. Ten years ago Mark Wilson introduced KENBAK-uino, a reproduction...
In this project, we will build a 2.4GHz Wlan scanner using the nRF24L01 radio board. In this project, the output delivers all the interference and information in the scanned area in the form of ASCII codes. In the project of making this scanner,...
Table of Contents 1. Hardware2. The serial console 1 Hardware The Netgear ReadyNAS 3138 is a 1U rack-mounted NAS server with 4 3.5'' SATA drive slots. I have recently purchased such a device in order to use it as a small home fileserver and decided to...
20200731 : cleanup of many dead links... This page serves 2 purposes : share the resources I have created for all those articles (because http://ygdes.com/sources/ and http://ygdes.com/GHDL/ are not the most convenient) maintain a somewhat not-too-inaccurate...