135 Results for "%s"

Ultrasonic Antifouling
Project by Chuck
Ultrasonic project to restrict growth of algae and barnacle fouling on exterior boat hull.
- 1
- 0

Evaluating a Simple 1-Wire Master Driver
Project by Dana Myers
A close look at the signal integrity of a simple 1-Wire master driver
- 2
- 3

CM6 - Compliant 3D printed robotic arm
Project by Petar Crnjak
Cheap, Open-source, safe, and compliant 6 - Axis 3d printed robotic arm based on Quasi direct drive BLDC drives.
- 112
- 92

Junkbox/PostApocalyptic RS-232/TTL/3V3 converter.
Project by RW
In which the tinkerer bodges together a serial level convertor to allow comms between boards using RS-232 5V TTL or 3.3V signal levels.....
- 1
- 1

Aeropress Coffee Maker Sustainable Glass Upgrade
Project by Luke
Keep compatibility with existing paper filters and hardware, but replace the leaky cap and tube with glass, so it won't wear out.
- 4
- 5

More Better Home Theater Remote
Project by chris owens
As commercial home theater remote controls disappear from the market, can we have a better open-source one?
- 1
- 0

The Village
Project by Dustin
Long term project to build an entire village using sustainable technology and traditional methods.
- 5
- 4

RIGOL All in One
Project by Marmaduke1st
I want a Digilent ADP5250 but .... I can't afford one
- 1
- 2

Could someone help me with this wifi minicam
Project by pepski
help wanted
- 0
- 0

Burning Man Camp Proximity Sensors
Project by Alex Netsch
A network of devices that sense proximity relative to each other and blink a light to help the camp locate other members on the playa
- 3
- 4

Hacking the Melnor 53280 into an iOT Timer
Project by laurentopia
Creating a replacement for the Melnor timer, one that allows for easy timing of multiple valve units in a web interface.
- 7
- 4

3D Facial Position Estimation Using OpenCV!
Project by Shranav Palakurthi
I made a facial detection algorithm which is able to estimate the position of your face in 3D space with a pretty good accuracy.
- 11
- 6

Macbook Pro RAM upgrade
Project by Sebastius
Soldering in 16GB of RAM. Easy or buy a new Mac after the attempt? ;)
- 36
- 27

Automated polarimetric microscope
Project by E/S Pronk
Polarimetric camera with a microscope lens attached to a 3d printer.
- 16
- 17

"Spine" for 3+Pi
Project by Tobius
2 x 6DoF + 2 x 9DoF Sensor module(s) for 4 point reference in 3D space. Optional Accessory for 3+Pi board.
- 0
- 0

|<
<
3
4
5
6
7
>
>|