Close

141 Results for "《〈 문의 OIO↗5793↗7458 》〉 선릉셔츠룸㉢ ㈊blankΓ셔츠룸추천셔츠룸℡few 선릉셔츠룸셔츠룸 선릉셔츠룸œ셔츠룸추천Яsupper┤"

  • oq0017 repairing obsolescence
  • Details     from oq0017 repairing obsolescence
  • Obligatory danger warning; there are several high potentials within an oscilloscope which you should become familiar with before opening any such device. Proceed with caution. Original Fault Finding; The list of faults when I first received my particular...

  • And the PSU
  • Log     from Hot logic
  • So now I can generate 61V@2.1A though I can't seem to control it via USB. Yet. But it's already a game-changer for my lab :-D Update 20170417 : the stack entry has been deleted :-( I had noted a few things, I'll try to remember them and write them down...

  • I got it centered

  • Log     from The analog joystick adventure
  • After many adventures I finally manged to get a proper readings from the analog. at first I tried to work it out using a 555 IC in monostable configuration and to read the result using the pulsein command. My first big task was to find the...

  • Xbox One Adaptive controller
  • Log     from BlueRetro
  • I got the Xbox adaptive controller for a few weeks now and it's quite an impressive device. Its goal is to help gamers with limited mobility. But once you know how it works you can actually use it to interface with any device you can think of others...

  • Hackaservo.io
  • Log     from GimbalBot
  • So I've come to the conclusion that my servos were designed to actuate smaller masses, and as such their control parameters aren't exactly suited for the larger than normal loads I'm putting on them. The vibration I'm seeing at the end of each stroke--particularly...

  • Command and control as ASCII bytes
  • Log     from Discrete YASEP
  • Guys, this post is going to be fun. Like, a lot of fun.If you have read the past logs you know that I include a UART interface for input-output with a host computer. This host can contain software to assemble or disassemble code, and whatever fancy softwary...

  • Automatic Bike Lighting System
  • Details     from Automatic Bike Lighting System
  • I bike daily to work, and sometimes i'd like to have automatic lighting system which would turn on by itself whenever it's getting dark, not forcing me to stop and turn my tail light and second, backpack attached tail light on. That's where this project...

  • First automated ramps
  • Log     from ReTest-yg
  • I soldered the test board and tested the whole hardware :-) Not visible is the thick cable to the PSU to reduce losses (unlike the previous tests with a breadboard and ohmic losses here and there... Some measurements were off by maybe 10%) There were...

  • Optimize: Round 1
  • Log     from 1K Challange Laser
  • How did we go from around 300 bytes to 1500 bytes when all we did was try to modularize our code? This is where the disassembly window started really becoming the star of the show.Going through each assembly instruction, we quickly realized that instructions...

  • More CAD Layout, Tire Arrived
  • Log     from DIY Onewheel
  • Have been continuing to lay out the board design in Inventor this week. I'm trying to design as much of this as possible in CAD now both to prevent screw-ups that would push my budget (trying to keep this entire project under $200) and to hopefully make...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday