17 Results for "8-bit cpu"

Binary to Hex 7-Segment Decoder w/ Discrete Parts
Project by Eric Ljungquist
A discrete component solution to convert 4-bit binary to 7-segment display signals.
- 1
- 1

PCBrulerS
Project by Jan B.
A small PCB ruler with a mm, a 1/8 and 1/10 inch ruler.
- 14
- 18

Remoticon 2 badge
Project by Thomas Flummer
DIY Badge for Remoticon.2
- 22
- 24

PIXI Analog Shield
Project by MagicWolfi
An Arduino Shield using the Maxim MAX11300 for 20 Programmable Mixed-Signal I/O with 12-Bit ADC, 12-Bit DAC, Analog Switches, and GPIO
- 53
- 18

PlainDAQ - DAQ Module for Raspberry Pi Pico
Project by Alperen
Open Source DAQ module for Raspberry Pi Pico
- 13
- 12

lil all-in-one power chip
Project by Josh Valdes
Voltage regulator, capacitors and all, on a DIP-8 size board. Select 3.3v or 5v built in, or add a single resistor for 0.8v-26v. 1.2A
- 8
- 6

Tokay Lite: Multi-purpose ESP32 AI Camera
Project by Max Olender
Battery-powered IoT camera with nightvision, motion detection and TensorFlow Lite support
- 30
- 17

Reviving the TI-92 calculator into a RPI PC
Project by pcadic
We are re-engineering the old PCB board into a modern PCB for a simple swap. The goal is to get an up to date RPI computer
- 80
- 54

KiCAD Coil Creator
Project by colton.baldridge
Tool to create PCB coils for KiCad
- 5
- 2

Aurora: Motion activated underbed LED light
Project by Max
Underbed RGB LED light (controller): Motion activated, separate push button to control lightning (different modes), logarithmic LED-fading
- 636
- 3

MAX7000S CPLD JTAG Tester
Project by tomcircuit
A simple JTAG test board for 84pin PLCC MAX7000S CPLD
- 2
- 4

500mW (27dB) ISM Band Transceiver
Project by Jon Thomasson
This is an ISM band transceiver utilizing the Semtech SX1238. Similar to the popular RFM69 except with an added power amplifier on transmit.
- 20
- 21

Stormduino
Project by Chromico
Stormduino the Arduino UNO clone made in KiCad
- 5
- 3

Small laser plotter for PCB manufacture
Project by dechemist
This is my next attempt to build a laser plotter to do the exposing part in the PCB manufacture process.
- 5
- 2

Pyxel Paradise
Project by rkrishnasanka
A DIY mini arcade cabinet that can run games built using Pyxel (https://github.com/kitao/pyxel) on the Raspberry Pi.
- 7
- 7

1
2
>
>|