Close

3953 Results for "%EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC%EC%96%B4%EB%94%94%E2%86%92optime4%2Ccom%EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC %EC%B2%AD%EC%A3%BC%EB%A7%88%EC%82%AC%EC%A7%80 %E2%86%90 %EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC%E1%99%8E %EC%B2%AD%EC%A3%BC%EC%98%A4%ED%94%BC%EC%96%B4%EB%94%94%E1%99%8E %EC%B2%AD%EC%A3%BC%ED%9C%B4%EA%B2%8C%ED%85%94 %EC%B2%AD%EC%A3%BC%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

  • Log#03: 106MHz !
  • Log     from YASEP News archives
  • By whygee on Thursday 7 August 2008, 08:06 - VHDL For a while, I was happy with the idea that YASEP would work with a standard SDRAM chip running at 133 MHz. So the core would run at 66MHz and a 16-bit datapath would provide 32 bits in 2 cycles. Good...

  • Debugging Basic Functionality
  • Log     from 2021 HDP Dream Team: EJA
  • Note: The content from this project log was from Sept. 5th. We were still waiting for the boxes to arrive to Leo and Tobi (luckily, now, as of writing this, Leo’s box has arrived and Tobi should be receiving it today). Remote debugging testing code proved...

  • TOSLINK DAC
  • Details     from TOSLINK DAC
  • This came about because I bought a box from Belkin to do AirPlay 2 for our patio speakers (which have an amplifier I built myself). That Belkin box's analog audio output is about 20 dB too low, but fortunately they include a TOSLINK output...

  • PCB Part 3: Analog output testing
  • Log     from DSP PAW
  • With the input signal circuit figured out, it's time to move on to the output circuits. There are two, one for the algorithm output and another for the signal generator, though both use the same exact circuit. This means we can just test the signal output...

  • RadMon
  • Details     from RadMon
  • Each unit is equipped with Geiger Muller tube „SBM-20“as adequately sensitive Gamma ray detector. These tubes are low cost and widely available as former USSR military surplus. Microcontroller inside unit, with accompanying developed firmware,...

  • The Atomik Controller
  • Details     from The Atomik Controller
  • Features:Full featured web administration GUIMaximum of 65,280 uniquely addressable Mi-Light RGB Devices ( But an unlimited amount of Devices can be Synced to a single address )Maximum of 65,280 uniquely addressable Mi-Light CCT Devices ( But an unlimited...

  • First pixels
  • Log     from PIC Graphics Demo
  • After a little probing with the scope, I figured out how to program this thing. So far, just big, ugly boring yellow and magenta. I've used 364 bytes of my 1 kB - hopefully there is enough room left to do something cool. I guess I could always move to...

  • Kids School Control
  • Details     from Kids School Control
  • Kids School Control Preparation: RFIDConnection Pins: We need this to connect our RFID module to Raspberry pi 3. Preparation $ sudo nano /etc/modprobe.d/raspi-blacklist.conf #blacklist spi-bcm2708 $ sudo apt-get install python-dev $ git clone https://github.com/lthiery/SPI-Py.git...

  • Third attempt
  • Log     from Growing vegetables in sealed containers
  • This experiment was started on 2nd January 2018. It is the same as the second experiment (started 8th December 2017), but with only 12ml of water added to the bottle rather than 36ml. I also tried not to powder the soil too finely when I added it to...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday