44 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉하이킥㉿didn't선릉하이킥레깅스룸™하이킥레깅스룸relation 선릉하이킥⒰강남하이킥레깅스룸Х선릉하이킥레깅스룸グゅ선릉하이킥boston"

Latticino (ESP32+FPGA)
Project by paoloAgo60
A very small board for IOT in DIL20
- 10
- 4

fpga risc-v soc
Project by misha
Simple implementation of risc-v soc on fpga
- 3
- 2

fpga mandelbrot fractal generator
Project by misha
It is verilog implementation of mandelbrot fractal generator. Code tested on Artix-7 XC7A35T FPGA board.
- 0
- 2

An Approach to HDL Design: Simple Filter
Project by Jake R.
Design flow for creating a digital filter
- 3
- 1

The Moncky project
Project by bigbat
Creating a complete working retro 16-bit computer from scratch in the style of the C64, CPC 464 and alike using an FPGA
- 30
- 24

Bit-serial CPU based on crossbar switch
Project by zpekic
256 switches and few shift registers to implement a working 16 or 32-bit integer arithmetic calculator (+, -, *, /, isqrt, BCD / bin conv..)
- 10
- 17

From bit-slice to Basic (and symbolic tracing)
Project by zpekic
Step by step from micro-coded Intel 8080 compatible CPU based on Am2901 slices to small system running Tiny Basic from the Disco Era.
- 8
- 6

Nitinol motor
Project by phazedphoton
This project was an experiment to see if actuating SMA Nitinol coils with an FPGA could produce repetitive motion
- 3
- 5

Digital Audio Mixer w/ Filters & Multiple USB I/O
Project by MS-Dzo
Using FPGAs and MCUs to build my dream audio setup
- 14
- 1

HD6309 Singleboard Computer
Project by tomcircuit
Hitachi HD63C09 clocked at a blistering 3 MHz with a capacious 64K of RAM! Retroputing bliss...
- 184
- 62

Chameleon
Project by Michael A. Morris
FPGA shield board with XC3S50A/XC3S200A FPGA, 2 232/485 ports, 32Mb Flash, 4kb FRAM, 128kB SRAM, 12 Arduino UNO connections.
- 72
- 20

1 CUP
Project by DepletionMode
A Completely Useless and Pointless 8-bit home-brew computer
- 15
- 11

Hardware encryption part 1 XOR and Fiber optics
Project by Jeremy Hong
I built this circuit at Mhacks in Ann Arbor, Michigan and it took me about 18 hours to complete it.
- 2.1k
- 7

DIPSY
Project by Antti Lukats
DIY System on Chip based on FPGA, priced below 5 USD
- 467
- 247

Soft Propeller
Project by Antti Lukats
DIPFORTy1 "Soft-Propeller" Zynq-7, Dual CortexA9+ FPGA DIP40 Parallax Propeller I compatibles footprint
- 152
- 91

1
2
3
>
>|