Close

4631 Results for "open source ecology"

  • Transcript

  • Boian Mitov 3:01 PM Hello @Lindy Thank you for organizing this :-) In the meantime, you can all put your questions here > https://hackaday.io/event/158266-making-programming-easier and @Boian Mitov could give us an introduction? Stephen Tranovich 3:02...
  • Hack Chat Transcript, Part 2

  • Chip Gracey12:29 PM@IRC, no, SD boot would take longer. I'm talking about an 8-pin serial Flash. IRC12:29 PM[Kamilion] normal old SPI NOR, winbond 4-bit style. IRC12:29 PM[Kamilion] Gotcha. Ken Gracey (Parallax)12:29 PMHey @Joshua Donelson so good to...
  • Hack Chat Transcript, Part 1

  • Welcome all! We'll get started in about 15 minutes. Feel free to chat away morgan11:46 AMI hope to figure out how all this works... Daren Schwenke11:46 AM*cough* Machinekit *cough* morgan11:46 AMisn't it the same things?!? already confused Daren Schwenke11:46...
  • Hack Chat Transcript, Part 1

  • Hi everyone, welcome to the last Hack Chat of 2020! I'm Dan, I'll be moderating again today for David Lovett, aka Usagi Electric, and we're going to be talking about Vacuum Tube Logic, or pretty much anything about vacuum tube circuits. David, can you...
  • Hack Chat Transcript, Part 2

  • itsshreyarora12:49 PMis it cool if i do everything with an rpi and a bunch of relays? itsshreyarora12:50 PMcool its rpis and relays,,, big tech can get tf outt sn3ll12:50 PM@Zack Freedman Do you have any advice on making videos from your projects? joeykrause3712:50...
  • Hack Chat Transcript, Part 1

  • Hi everyone, welcome to the Hack Chat today. My name is Dan and I'll be moderating today along with Dusan. We're joined by Uri Shaked today, who's doing a HackadayU course soon on RaspPi 2040 and Pico, and completed a course earlier in the year on AVR...
  • Hack Chat Transcript, Part 2

  • anfractuosity12:19 PMIs the minimum layer height you can achieve dependent on the resin used (i assume different resins may be more sensitive to the UV light?) along with the stepper motor? Andrew Sink12:19 PMAbsolutely! Andrew Sink12:19 PMThat's a great...
  • Hack Chat Transcript, Part 3

  • Andrew Sink12:39 PMI've made mechanical assemblies printed fully dense on the Mars 2 Pro, and shrinkage was not something I had an issue with Thomas Shaddack12:39 PMThe radical polymerization leads to sometimes fairly significant shrinkage. (Low single...