35 Results for "《 예약문의 OIO↗8489↗8306》선릉드림레깅스룸㈖강남드림레깅스룸contain강남드림레깅스룸강남드림드림레깅스룸beds 선릉드림Ⅹ ｔ선릉드림선릉드림레깅스룸unnatural"

Access B
Project by Omar
Create applications in Visual Studio C# that can communicate with a 18F2550 and use it's peripherals
- 21
- 2

PIXI Analog Shield
Project by MagicWolfi
An Arduino Shield using the Maxim MAX11300 for 20 Programmable Mixed-Signal I/O with 12-Bit ADC, 12-Bit DAC, Analog Switches, and GPIO
- 53
- 18

DMG-32
Project by Andy
Just in case you wanted to play your old games inside an old Gameboy
- 7
- 4

S1G RF: Sub 1GHZ Radio Modules 915MHZ and 433MHZ
Project by AVR
Sub 1GHZ RF wireless modules operating at 915MHZ and 433MHZ ISM bands, based on the ADF7023, full open source!
- 2k
- 112

4 Port USB Hub
Project by Lacho Tomov
Using GL850G IC on a 2 layer board, made with KiCad
- 8
- 4

PCBrulerS
Project by Jan B.
A small PCB ruler with a mm, a 1/8 and 1/10 inch ruler.
- 14
- 18

A modular sequencer for electronic music
Project by joaquin.aldunate
A sequencer that offers the possibility to be connected modularly and musical operators to build up more complex live electronic music.
- 1.5k
- 21

IoT RGB LED Matrix Controller (ESP32)
Project by Solenoid
This project is about building and programming an ESP32 based controller for a 32x32 RGB LED matrix, controlled from Node-RED over MQTT
- 87
- 35

KAmp
Project by Kuro
TPA3116D2 based audio amplifier
- 140
- 11

500mW (27dB) ISM Band Transceiver
Project by Jon Thomasson
This is an ISM band transceiver utilizing the Semtech SX1238. Similar to the popular RFM69 except with an added power amplifier on transmit.
- 20
- 21

ULX3S powerful ECP5 board for open source FPGA
Project by radiona.org
University digital Logic Learning Xtensible board release 3 with SDRAM
- 160
- 305

Aurora: Motion activated underbed LED light
Project by Max
Underbed RGB LED light (controller): Motion activated, separate push button to control lightning (different modes), logarithmic LED-fading
- 636
- 3

Pyxel Paradise
Project by rkrishnasanka
A DIY mini arcade cabinet that can run games built using Pyxel (https://github.com/kitao/pyxel) on the Raspberry Pi.
- 7
- 7

Firefly v1
Project by Anas Raza Khan
Atari Punk Console on a square 1-inch PCB
- 1.3k
- 9

kicad StepUp: a Seamless ECAD MCAD Synchronization
Project by Maurice
Keep your design synchronized between ECAD and MCAD allowing to optimize the layout based on the mechanical constraints.
- 25
- 22

|<
<
1
2
3
>
>|