53 Results for "3D%20printing"

3D printable antweight battlebot: Bulldog
Project by Brian Brocken
Print out the chasis and weapon, place in all the necessary components and you're ready to fight your first battle.
- 8
- 7

Tertiarm - 3d printed robot arm
Project by anastas.car
This is low cost 3d printed robot arm based on Ikea Tertial lamp.
- 4.3k
- 30

3D Printed "No Fall" Toy Mechanism
Project by Greg Zumwalt
A 3D printed electro-mechanical "no fall" mechanism reminiscent of the windup and battery powered toys of my youth.
- 217
- 4

World's Smallest 3D Printed Robot Arm? (Arduino)
Project by Build Some Stuff
A tiny arm with motorless joints.
- 1
- 1

Ava v2 - 3D Vision & Verbal Robot
Project by Martin Triplett
This is a general purpose household and educational verbal robot. It learns data from the internet and talks about it.
- 4
- 4

Atlas - 6DOF 3D printed universal robot
Project by Damian Lickindorf
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
- 2.3k
- 562

3D-printable strain wave gearbox - harmonic drive
Project by Brian Brocken
3D-printed strain wave gearbox strong enough to pull a car forwards.
- 13
- 13

Robot Gearbox
Project by gearswheelsrobots
A stepper motor gearbox for robots. A setup with planetary gears fits to mobile robots, a setup with wolfrom gears for robot arms.
- 5
- 1

Kame, ESP8266 based quadruped
Project by Javier Isabel
Kame is a quadruped robot with 8 servos and an ESP8266
- 1k
- 165

Lunar PICO rover
Project by Apollo Timbers
A PICO sized lunar rover
- 2
- 3

Robot Tank /w Jetson Nano
Project by pRoFiT
Starting work on a tank track robot. Purchased a Jetson Nano for the main controller brain. Arduino Mega + Ramps for motor control
- 20
- 16

YARRM - 7-DOF Low-Cost Robot Arm
Project by Jonathan Lussier
Yet Another Robot aRM - where I develop a low-cost compliant robot arm with a 1meter reach, 1KG payload.
- 205
- 126

Xpider: World's Cutest Spider Robot
Project by Xpider
The neural network-powered spider robot that fits in the palm of your hand.
- 339
- 44

Valify V2 Robot Lawnmower
Project by Robin Fröjd
3D Printed Jetson TX2 based robotic lawnmower aims to build an "smart" robotic lawnmower using open technology
- 125
- 87

RoboGuts™ S.T.E.A.M. Education Program
Project by Walt Perko
RoboGuts™ circuit board - Lessons and Examples designed for 5 years old on up - Beginners & Hobbyists http://www.R2Pv1.com/
- 604
- 6

1
2
3
4
>
>|