Close

1573 Results for "%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8%E3%81%A3 %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9conspicuous%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%EC%85%94%EC%B8%A0%EB%A3%B8solid %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9%E2%94%82%C3%86%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0derivative"

  • side quest: temperature measurement

  • I must confess I haven't spent much time looking at NTC curves before. My prior knowledge was that they are somewhat ill-defined and can only deliver reliable measurements when calibrated individually. source: https://support.belimo.us/Documentation/Standards-Compliance/957165601/What-is-the-difference-between-NTC-10K-Type-2-and-Type-3-sensors.htm...
  • Debugging

  • Debugging Need to get this project working. One problem is that the Nano does not have enough pins. So I have used a Meduino (a Mega2560 Pro Mini). Here is the schematic: Here is the PCB: The ports (P1 & P2) match the TTA8 bus. A problem with the Meduino...
  • OPS ENUMERATED - Draft

  • This represents a complete OPCODE list with 14 Constants (int values) available and 10 Labels (byte values) available for creating subroutines. Constants were favored over Labels, but this is up for evaluation. NOP and HCF were both added to the official...
  • Control Board FPGA Pinout

  • I might be missing a few connections yet which I'll correct as I come across them, but here is the pinout of the XC3S250E FPGA on the control board.  Note that the SRAM and the Flash share an interface bus.  Also note that the JTAG interface...
  • 5 x 7 Flip Dot Display Driver

  • Display Layout (from behind, left to right) A12345 B12345 C12345 D12345 E12345 F12345 (Z123) G12345 Connection Blocks (mapping) B1 F1 A2 G2 | E3 B4 F4 A5 A1 G1 D1 F2 | F3 A4 E4 B5 Z3 C1 E1 E2 | G3 D3 D4 C5 Z2 Z1 B2 D2 | C3 C4 E5 G5 Z1 Z1 C2 A3 | B3 G4...