My friend Dylan Brophy inspired me to investigate the ability to output the cyrillic text using different output devices, supported by Terminal-BASIC. 1. Using symbols others then capital latin in identifiers not possible and unnecessary. 2. USART output....
SATA StatusAfter weeks of painful debugging. I have been able to read and write to the hard drive!I ran into an issue though... the speed at which I can communicate with my FPGA to/from my computer maxes out at about 16MBs and the hard drive reads/writes...
Stephen : Alright, let's get rolling. A BIG hello to @Parker for joining us today Parker : Howdy everyone Stephen : @Parker, why don't you kick this off by giving us an introduction of who you are, what you do, and what...
Dumped data the other day after we've had some wicked weather (leading into freezing temps again, of which I hope last night was the last)-=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.04.04 06:17:37 =~=~=~=~=~=~=~=~=~=~=~=0: 24 km - Thu Apr 1 2016 3:28:25...
Hello, everyone we thought it was time for a complete log since the two previous ones were quite small. Please, take note that that you can now find the Source Code in the shared files and that the components list has been updated too. Let’s look at...
Today we present the FlameWheel Robot assembly tutorial and quick-start guide! It is rather difficult to assemble this robot without guidance. Feel free to refer to my introductory tutorial today.Flamewheel (A 2WD Remote Control Robot) is part of our...
The ROP2 and ALU part has been slowly expanding to the SUXEN but the log 70. The nexus reminds that something is missing : I have forgotten to include PC+1 (NPC) value. So another level of MUX is required, which is fortunate because I had...
The story so far... Update: Row scanning working.Known/working: Building and loading via JTAG new firmware into the main FPGA. This firmware is starting from scratch, we don't understand much yet about the default Barco firmware, although we've dumped...
Hardware testing is complete on all the jump and branch instructions. So that's the first 8 out of 256 instructions tested! The next 24 are loading operands. These should work fine since the jump/branch instructions are also loading operands in order...
Why Did We Build This? "Prevention is better than cure" is one of the effective measures to prevent the spreading of COVID-19 and to protect mankind. Many researchers and doctors are working on medication and vaccination for corona. COVID-19 spreads...
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...
Project Overview Video for Hackaday Prize 2023: The End Result The Plan In principle it is simple: by connecting different combinations of binary value resistors in parallel, and assuming a constant input voltage, we can consume any arbitrary amount...
The work by others to port Arduino BASIC to the Smart Response-XE device was of interest, but I wanted a few enhancements to extend battery life (auto shutdown) and I wanted an easier way to do math on the console rather than typing "PRINT" everytime...
3-11-2024 See these two 2011 Liliputing and TechCrunch articles, which were partly the inspiration for this project: https://liliputing.com/pixel-qi-suggests-low-power-tablets-could-be-powered-by-1w-solar-panels/(6-3-11) https://techcrunch.com/2011/06/04/first-solar-powered-laptop/ (6-4-11)...
Background If you have been following Hackaday for a while, you will have seen on numerous occasions the KENBAK-1, regarded by many as the first commercial personal computer. Ten years ago Mark Wilson introduced KENBAK-uino, a reproduction...