3479 Results for "《 예약문의 OIO↗8489↗8306》가라오케ㅒ청담가라오케sweepご강남가라오케선릉가라오케청담가라오케conviction 가라오케㈛선릉가라오케㎹ㄻ가라오케추천cab"

Standalone digital TDR (TDR-G3)
Project by MS-BOSS
A third-gen fully digital standalone TDR built from common parts.
- 13
- 7

Automatic Infrared Water Tap at $5
Project by Subhajit
Place your hands under the taps, the water will come out from the water switch and the water will stop automatically after removing the hand
- 3
- 2

WinDIY - HAWT Wind turbine
Project by Fab
Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.
- 245
- 191

Heavy Metal Hollywood Spider
Project by Ron Grimes
Raspberry Pi spider
- 161
- 3

Microbit Robotic WiFi Camera Setup
Project by Electorials
An easy, entry-level setup showcasing all the features of the Microbit Robotic WiFi Camera with Electric Control from Digitspace.
- 3
- 5

LLTP - Light Logic Transistorless Processor
Project by Dr. Cockroach
My attempt to create a CPU/MCU without transistors or relays
- 38
- 43

Weather station with Lightning rod
Project by Nicolas Lago
This project has not yet been developed, so no further detatails. Este proyecto aún no desarrollado, por eso no se presentan mas detalles.
- 0
- 0

HDD Delta Robot
Project by Omar
This is the attempt of building a delta robot using parts from HDD and my parts bin, I'll go as far as I can.
- 8
- 7

Ultra Low Power thermometer
Project by Miroslav Hancar
With a current consumption of only few uA, this thermometer is capable of running for years from single CR2032 (and forever from solar cell)
- 42
- 49

WinDIYingThing - Automatic coil winder
Project by Fab
WinDIYingThing is a side project that helped me to wind the coils for the generator that i'm using with "WinDIY" a 3D printed wind turbine
- 21
- 15

Take 3 minutes to create an RTOS project on STM32
Project by RT-Thread IoT OS
Create an RTOS project on STM 32f103RB by using RT-Thread Studio #IDE A handy and free-to-use IDE for embedded developers.
- 6
- 6

STRL472 Power IC, Utsource
Project by Electroniclovers123
STRL472 IC has 10 pins but only 8 have terminals and functional. 6 input and 2 output pins
- 0
- 1

ASCII Video Terminal
Project by gkaufman
Geoff Graham released an inexpensive video terminal design in 2014. Several others have updated the firmware. Here is an updated PC board.
- 43
- 35

Gliderport Weather Monitor
Project by Connor Huffine
Building a weather station for my local glider club
- 1
- 1

Jumbo Remote Upgrade
Project by remotemod328
Replace the obsolete micro controller board with a new one containing an Atmega328PB, bringing new life to this product!
- 212
- 2

|<
<
2
3
4
5
6
>
>|