Tarek Loubani10:28 AMYou might remember Christoph from such hackaday articles as https://hackaday.com/2017/06/30/3d-printed-halbach-motor-part-deux-tuning-testing/ and https://hackaday.com/2014/05/24/the-hour-of-the-3d-printed-clock-draws-nigh/ Tarek...
Welcome everyone, time for the Gigatron Hack Chat. I'm Dan Maloney, I'll be the moderator today. I want to welcome Walter Belgers to the chat today to talk all about the Gigatron. Walter, thanks for coming on in what must be a difficult time. We were...
OK, here we are at the top of the hour with a lot of new virtual faces. I'm Dan, I'll be your mod today. Let's welcome Mike Gardi to the Hack Chat today, to talk about the wonderful pieces of early computer history he recreates from scratch. Hi Mike!...
OK folks, let's get going. I'm Dan and I'll be the mod today for Dalibor Farny, who we're very glad to welcome to the chat. Hi Dalibor, thanks for joining us today. Can you start us off with a little about your background and how you got started in Nixies?...
OK, all, we've already got a good discussion going, but let's kick things off "officially". Welcome all, I'm Dan, and Dusan and I will be modding today as we welcome Jonathan Schwartz to the Hack Chat. And I apologize in advance if my fingers get wrapped...
Top 3 struggles I have with robots and how this project solved them. 1) Cost too much. Mostly because of expensive servos and high end processors. - Designed a cheap driver/sensor board to read the absolute angle of the motor joint and run the...
Dan Maloney11:09 AMHi all, Hack Chat starts in about 50 minutes: Dan Maloney11:09 AMhttps://hackaday.io/event/181633-robot-dogs-hack-chat HACKADAY Robot Dogs Hack Chat Afreez Gan will host the Hack Chat on Wednesday, September 29 at noon Pacific. Time...
H3lixFossil12:08 PMi think msg uses his daily? might be mistaken back7.co12:08 PM@Hugh Mungis I literally made a cube :) https://back7.co/home/the-open-frame-mini cyzoonic12:08 PM@back7.co I am trying to figure out how to get nice lettering on a lasercut...
Inne12:25 PM@Hugh Mungis A cyberdeck device that drills he connectors back in :D. Dan (a8ksh4)12:25 PM@io Tenino You can use a buck boost converter in front of a charger and as long as it supplies enough current, it'll give some flexibility. thesebelik12:26...
Dan Maloney 3:00 PM OK, here we go! I'm Dan, I'll be modding today along with Dusan as we welcome Bryan Murphy and Sam Treadgold to the Hack Chat. I've seen Bryan, is Sam there too? Also maybe someone else? Dusan Petrovic 3:00 PM Welcome to the Modeling...
You said anything...so I thought I would see what happens when I share all the links from this Open Source GIS Tool website. This is information that helps my project team work on our upcoming projects. Enjoy! Open Source GIS[Last...
Fortunately most of the NASA documents are available. They can be found on-line at https://www.ibiblio.org/apollo/Documents/ The following documents are what I leaned heavily on in gaining an understanding of how this computer...