41 Results for "3D printing"

LittleBot
Project by slantconcepts
A simple 3D printed Arduino robot to introduce kids to STEM topics.
- 1.3k
- 10

Quadruped robot with 22 DoF
Project by Dimitris Xydas
This is Quadbot 17, a work-in-progress quadruped robot with 22 degrees of freedom, based on Robotis AX-12 motors and a 3D-printed chassis.
- 94
- 66

Building the Thor robot
Project by Olaf Baeyens
Building a 6-axis robot based on the Thor robot. When size DOES matter!
- 366
- 67

8BitRobots Module
Project by Tim Wilkinson
A common hardware, software and 3D printed module to enable fun, educational robots anyone can print and program.
- 48
- 32

World's Smallest 3D Printed Robot Arm? (Arduino)
Project by Build Some Stuff
A tiny arm with motorless joints.
- 1
- 1

Edog - Mini 3D printed Quadruped Robot ✨
Project by Gaultier Lecaillon
Hi, I'm edog, a 3D-printable quadruped robot
- 130
- 114

3D-printable strain wave gearbox - harmonic drive
Project by Brian Brocken
3D-printed strain wave gearbox strong enough to pull a car forwards.
- 13
- 13

CyBot Cycloidal 6 axis 3d printed Robot Arm
Project by Samuel Meurice
A 3d printed robot arm using cycloidal gearbox and steppers.
- 36
- 37

Robot Tank /w Jetson Nano
Project by pRoFiT
Starting work on a tank track robot. Purchased a Jetson Nano for the main controller brain. Arduino Mega + Ramps for motor control
- 20
- 16

YARRM - 7-DOF Low-Cost Robot Arm
Project by Jonathan Lussier
Yet Another Robot aRM - where I develop a low-cost compliant robot arm with a 1meter reach, 1KG payload.
- 205
- 126

M.A.R.S.
Project by Guus van der Sluijs
MADspace Advanced Robotics System: Open source 3D printed Mars rover
- 536
- 223

ESP32 Mini-Bot
Project by Matthew James Bellafaire
A small proof-of-concept ESP32 Bot
- 7
- 9

Custom Articulated Joint
Project by Tim Wilkinson
I'm building a robot which requires small, articulated joints. Unfortunately I couldn't buy any, so I made my own.
- 91
- 68

Valify V2 Robot Lawnmower
Project by Robin Fröjd
3D Printed Jetson TX2 based robotic lawnmower aims to build an "smart" robotic lawnmower using open technology
- 125
- 87

Nutcracker Pin Walker
Project by Greg Zumwalt
A 3D printed Nutcracker themed pin walking robot reminiscent of a static model my father and I created some fifty plus years ago.
- 0
- 0

1
2
3
>
>|