135 Results for "《 예약문의 OIO↗8489↗8306》선릉가라오케や가라오케추천received가라오케가라오케가라오케사이즈scarcely 청담가라오케иª가라오케사이즈glowing"

Brick-Breaker Game using NIOS II on FPGA
Project by Sarang Nerkar
Brick-Breaker Game using the NIOS II processor on Altera's DE2 Board.
- 6
- 2

USB DEVBOARD v1 Based on V-USB
Project by bany.yusuf.nby
This project is a development of USBasp Programmer or similar that uses V-USB reference schematic but with more features that can be applied
- 998
- 2

Temperature Controlled Fans
Project by Mark Arnott
I use the Smart Servo Controller to show how you can easily control two fans with a temperature sensor
- 1.1k
- 2

Korg Delta CV & Volume Pedal Hack
Project by Scissorfeind
Control Voltage and Volume Pedal hacked from dead Wah.
- 1.1k
- 3

Alzheibuzzer
Project by espitall
Very simple alarm to monitor someone who suffers from Alzheimer's disease at night
- 1k
- 4

Yet another energy monitor
Project by dechemist
A low cost Energy-Monitor system which is deeply influenced by the openenergymonitor.org projekt
- 1.6k
- 10

Blinking 6W of LEDs
Project by Non-ICE
Blinking (2x3W) LEDs with an ATTiny45 and a 240mAh battery
- 1.8k
- 5

AVeRCADE
Project by danjovic
Customisable USB adapter for arcade controls.
- 5.8k
- 48

Global Cache Wireless Emulator (ESP8266)
Project by flynnwt
Use an ESP8266 for wireless I/R, sensors, and relay control. Emulate Global Cache protocol for compatibility with existing products.
- 2.4k
- 6

Micro:Bob
Project by deʃhipu
A simple bipedal robot controlled by Micro:Bit
- 2.2k
- 24

Custom IR Remote demodulator for Arduino Due
Project by Electromania
IR Receiver or Demodulator module made using photo-transistor BPW 77NB and standard NPN amplifier transistor PN2222A working on Arduino Due
- 1.5k
- 3

BeeTar - Wireless Rock Band Keytar
Project by Bill Peterson
A built-in wireless MIDI-to-USB interface for Rock Band keytar using XBee radios
- 1.3k
- 7

Adafruit Huzzah 42 Charlieplex LED grid
Project by brandonhawkes
Internet controlled 6x7 LED grid using an Adafruit Huzzah (ESP8266)
- 719
- 5

SERVOcontrol
Project by Alex
controller board for up to 18 Servos controlled by i2c or UART
- 1.2k
- 15

Thermal Printer for shopping lists
Project by Christoph
An ESP-01 based thermal printer. Could be used for many things; I decided to create a shopping list printer with a simple web interface
- 2.3k
- 16

|<
<
2
3
4
5
6
>
>|