1665 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

How to Make Buzz Wire Game
Project by kamalkedin123
I will guide you on how to make a popular buzz wire game using Arduino and Buzzer.
- 1
- 1

Parametric 3D Printed Cylindrical Coupling
Project by Conrad Brindle
Used as a base for assemblies, just put in your parameters and export the STL
- 16
- 13

Hi torque 3d printed cheap robot actuator
Project by Pavel G.
Cheap 3d printed hi torque robot actuator with electronics
- 57
- 35

Keypad console
Project by inferno4you
A two Arduino project that I hope to make into a gaming device.
- 4
- 2

IoT Industry board
Project by namnam
A low-cost hardware that can be applied to almost all common industrial applications
- 86
- 8

Social Distancing Reminder System #covid-19
Project by UTSOURCE
how to design a system that can remind you about social distancing. this system can help people to protect themselves even when they outside
- 260
- 1

SDWire and SDMux
Log from sd card emulation
Pleased to discover there are ready to use, non-emulation SD card mux devices available! These are great for 99% of the use cases folks message me about. https://wiki.tizen.org/SDWire SD Wire https://www.tindie.com/products/badgerdnl/sdwire-usb-c-sd-card-reader-sd-mux/...

Diving in with Calamity and Confusion
Log from Voyage 200 Upgrades
On my TI-89, one of the battery contacts on the PCB was heavily corroded and it took a good deal of time and heat to reflow solder to make a new pad. I did this to the V200 as a preventative measure too, but I guess I heated up the nearby fuse to where...

Assembly
Log from GNSS module 2.0 - GNSS via Bluetooth
The build of the module was pretty strait forward...with some complications. Except for one all footprints matched the parts I have. The LDO for VCC_USB was the wrong footprint, a SOT-89-3 should have been a SOT-223. I fixed this by soldering cables...

Grove - Dust Sensor (PPD42NS) Review
Details from Grove - Dust Sensor (PPD42NS) Review
Product Specifications General Type: SensorArchitecture: For ArduinoOutput Signal: Digital (Negative Logic and PWM)Detectable Range of Concentration: 0 ~ 280000 pcs/litre (0 ~ 8000 pcs/0.01cf CF = 283 ml)Detectable particle diameter: >...

Z-Uno
Details from Z-Uno
Z-Uno was designed to allow people to make their own IoT devices for their Smart Homes. Many times we were asked "Is there a pressure/radiation/water level/.../whate ever sensor in Z-Wave?" and we found that it would be cool if people can make their...

Sun Tracker 2 Revision 1 - Prototyping Board
Log from SunTracker 2 Revision 3
With the compass functionality tested on a breadboard, the next step is to transfer it to a universal prototyping board, adding a status display and IO expansion ports to drive a LED ring that simulates the horizon. For the board, I am going to use the...

Success!
Log from Voyage 200 Upgrades
So, the results are different than expected, but that is just fine. I'm running my V200 at 2x the speed it came from TI. For those who are TL:DR with my logs, you need a 1.21 kOhm resistor and an 18 pF capacitor. I never ran the MD5 checksums as I didn't...

FarmBot Genesis V3
Log from FarmBot - Open-Source CNC Farming
FarmBot Genesis V3 exhibits the following changes from Genesis V2: Updated bracket design to minimize the number screws needed, making assembly easier and faster and decreasing the number of partsSimplified cross-slide design combining 3 plates into...

Sniff the Wireless Data of a Sports Wrist Watch
Details from Sniff the Wireless Data of a Sports Wrist Watch
The “Crivit Sports” wrist watch HRM (Heart Rate Monitor)This is a wrist watch that can also display the heart rate BPM (Beats Per Minute)..The complete specs and the user manual can be found at http://www.lidl-service.com/cps/rde/xchg/SID-648946E8-5F850FDD/lsp/hs.xsl/product.html?id=47039228.The...

|<
<
108
109
110
111
>
>|