Close

36499 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗강남퍼블릭ㅾ퍼블릭술집partner셔츠룸퍼블릭㎙퍼블릭사이즈furnished 퍼블릭룸⑴퍼블릭사이즈㏃퍼블릭룸ふ㏘셔츠룸퍼블릭hospital"

  • Tiny Radio Telescope

  • What it can do: This radio telescope takes pictures in radio (on frequencies between 10.7Ghz and 12.75GHz). Theoretically, this radio telescope should be able to take pictures of the sky, in radio. If the dish is aimed properly, the results should create...
  • The actual informations

  • Detecting and identifying a card As stated in an earlier log, the card insertion is detected by grounding the pin *CD. But this is not enough to make the scope believe he have a know card inside him. You need to indicate him what type of card was inserted....
  • Choosing the UV LEDs

  • LEDs come in all manners of sizes, colors and brightness. To be able to choose the most appropriate ones, we need to know what are they going to be used for. For this purpose, we did some market research on UV curing glues. After checking the datasheets...
  • The BPI-PicoW-S3, A New Player in Town

  • The BPI-Pico-S3 is an ESP32S3 development board that has been fully adapted to CircuitPython, and the TinyUF2 + CircuitPython firmware is installed by default. No need to install any drivers in Windows 10, Windows 11, Ubuntu Desktop, or Mac OS operating...
  • Access SD Cards from the PSoC

  • I'm going to create a stand-alone PSoC project to use the PSoC to read SD cards. I'm going to start with the hardware defines for this project (which should leave the Z80 hardware pins unmolested) and just not download code. For the software piece, I...
  • Rewrite code with FastLED + Gamma Correction

  • Today, i rewrite a code of ambient light of arduino module applied FastLED library carefully. Why? there are 3 important thing, 1) the legacy code of adalight is based on SPI that is used by a RF module too. I think move pin in code of adalight from...
  • The Case of Cases

  • See Update BelowContext being more that of the puzzle of cases not one case "to rule them all," but I digress. The past week I've been going through a few catalogs to find an enclosure for D-DAQ's mainboard. Previously, the PCB's form factor was based...