Close

55 Results for "%E2%86%98 %EC%B5%9C%EC%A0%80%EA%B0%80 %C3%921%C3%92%E3%80%88%E2%91%BB%E2%91%B789%E3%80%8983%C3%92%E2%91%A5 %E2%86%97 %EA%B0%95%EB%82%A8%EC%93%B0%EB%A6%AC%EC%95%84%EC%9B%8C%E3%89%B5 %EA%B0%95%EB%82%A8%EC%93%B0%EB%A6%AC%EC%95%84%EC%9B%8Crest%EA%B0%95%EB%82%A8%EC%93%B0%EB%A6%AC%EC%95%84%EC%9B%8C%E3%83%AB%EC%93%B0%EB%A6%AC%EC%95%84%EC%9B%8C%EA%B0%80%EA%B2%A9obs %EA%B0%95%EB%82%A8%EC%88%A0%EC%A7%91%EC%A0%95%EB%B3%B4%E3%85%88%EC%93%B0%EB%A6%AC%EC%95%84%EC%9B%8C%EA%B0%80%EA%B2%A9%C2%A4%EA%B0%95%EB%82%A8%EC%93%B0%EB%A6%AC%EC%95%84%EC%9B%8C%EF%BC%A9%E2%94%80%EC%93%B0%EB%A6%AC%EC%95%84%EC%9B%8C%EA%B0%80%EA%B2%A9minute"

  • Expression pedals
  • Instructions     from Pedalino™
  • An expression pedal is more or less a pot with a 1/4" TRS jack plug. Most potentiometers have three connectors; Clockwise, Counter-clockwise, and Wiper. Amazingly, there are multiple different ways these can be wired, all achieving largely the same result,...

  • Connect your device with miniDenko
  • Instructions     from miniDenko
  • WIP Scan and connect to the AP named "miniDenko-xxxxx"(here xxxxx is a unique chip ID)Open http://192.168.1.5/ in a browser (Chrome recommended) Here you can edit & submit new messages ( Try to tap the "Add" button) miniDenko internally has 3 "slots"...

  • July 7, 2023
  • Instructions     from Geopolymer experiments
  • Begin with 200ml filtered water from the fridge tap, carried in an empty coffee pot. Using 4-6 ratio to calculate. 10x20 = 200ml H2O 4 grams sodium hydroxide x20 = 80 grams NaOH 6 grams silica x20 = 120 grams Unfortunately we only have 92.8 grams of...

  • Nozzles, Adapters and Quick-change
  • Instructions     from Thrifty Pick and Place
  • Googling around suggested to me that I want the Juki nozzles as they come with some springiness in the tip. This will allow for a good seal even if the Z is a little off. They do cost a little more than the Fuji. There is an excellent looking quick-change...

  • The Spinning Spectrometer
  • Instructions     from The Spinning Spectrometer
  • Arduino Code// Arduino code for THE SPINNING SPECTROMETER // // This code is released under the beerware license: As long as you // retain this notice you can do whatever you want with this stuff. If we // meet some day, and you think this stuff is worth...

  • Appendix
  • Instructions     from Carbon Intensity controlled Mains Socket Switch
  • Picking a value for a suitable carbon intensity to operate the switch is system dependent.  As I have suggestedd I have a modern boiler that is probably about 85% efficient.  A range of values for the amount of carbon dioxide equivalent releases...

  • Programm and mp3 files
  • Instructions     from Interactive maps for visually impaired
  •  Program We made commented program in *.ino file, You can download the file and read the comments to understand how the Map works. But if You don’t read the comments the program works in any case.   MicroSD Files You have to connect the pads...

  • Code
  • Instructions     from Electromagnetic Levitation Stabilization Apparatus
  • Open a laptop with the Arduino software (https://www.arduino.cc/en/Main/Software).Download the code from https://github.com/stressmaniac/ELSA or copy the code belowConnect the Arduino to the laptop using the USB 2.0 cable.Press the upload button on the...

  • Adjust Servo Values
  • Instructions     from Bot-thoven: A Robot Musician
  • Turn on the power supply and run the sample code provided (scales.ino). As shown below, adjust the servo min values as needed to ensure that the mallet strikes the xylophone key successfully.  //Parameters: (servo # on PCA9685, dynamic level, min....

  • Mount the PCB
  • Instructions     from Solar Powered WiFi Weather Station V3.0
  • The PCB Mount Frame is designed to mount the V3.0 PCB ( 100 x 86 mm). The PCB mount has text on it to show orientation and the battery goes to the top of the assembly. Align the PCB in such a way that the battery holder on the PCB and the mounting plate...

  • Motor current setup #1
  • Instructions     from Make your stock Ender 3 printer silent!
  • The final task is to set up the proper motor current. In this step, we should find the perfect balance. If we apply too much coil current, the system's heat dissipation will increase and after a certain point, we risk the possibility of burning our motor....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday