Today we present the FlameWheel Robot assembly tutorial and quick-start guide! It is rather difficult to assemble this robot without guidance. Feel free to refer to my introductory tutorial today.Flamewheel (A 2WD Remote Control Robot) is part of our...
SATA StatusAfter weeks of painful debugging. I have been able to read and write to the hard drive!I ran into an issue though... the speed at which I can communicate with my FPGA to/from my computer maxes out at about 16MBs and the hard drive reads/writes...
Today, i rewrite a code of ambient light of arduino module applied FastLED library carefully. Why? there are 3 important thing, 1) the legacy code of adalight is based on SPI that is used by a RF module too. I think move pin in code of adalight from...
Dumped data the other day after we've had some wicked weather (leading into freezing temps again, of which I hope last night was the last)-=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.04.04 06:17:37 =~=~=~=~=~=~=~=~=~=~=~=0: 24 km - Thu Apr 1 2016 3:28:25...
The story so far... Update: Row scanning working.Known/working: Building and loading via JTAG new firmware into the main FPGA. This firmware is starting from scratch, we don't understand much yet about the default Barco firmware, although we've dumped...
After I convinced myself that the emulator was probably OK, I turned back to the ROM. But after I found yet another ROM image online, and it turned out to be identical to the other three, I have to rule out bad ROM as well. Just as well as I was...
1/30/2021 - bringing up boards notes Sch/brd name Wedding 5Using Atmega328PBAAA battery footprint (not AA as mentioned before) still not quite rightProgramming over ISP works, power supply worksProgramming over FTDI/ UART works, I found this to be finicky,...
In this project, we will build a 2.4GHz Wlan scanner using the nRF24L01 radio board. In this project, the output delivers all the interference and information in the scanned area in the form of ASCII codes. In the project of making this scanner,...
In another page, I described my adventures converting an Ubuntu DEB package to an RPM package. This provided me with a native toolchain for my Linux workstation. I wished though that there was a solution that would allow far more Linux users, no matter...
I find it vexing that I have not yet figured out the RAM banking scheme. Some things:at reset, the peripheral configuration registers and internal RAM are mapped at 0000h. They can be moved elsewhere, but are not. The RAM at 40-ff is...
At this point, we decided to abandon the concept of mirroring. If we had had a much more complex design with many more points and more than 1kb, mirroring would have saved us space. Due to having so little space however, the algorithms power wasn't able...