For quite some time I have been thinking about the possibility to using a laptop to run all the heavy OpenPlotter and OpenCPN stuff instead of using a Raspberry Pi. The performance of the RPi is... well it's usable but it's not a pleasant user experience....
I got myself a Petzl NAO RL for (ultra-)trailrunning, wich is equipped with a USB C connetor for the battery. My first thougt: Nice, I could run it on a bigger powerbank in my backpack. This kind of works, when using a extention cord with 5 kOhm...
I tried a couple of other cards and found that they have different MBR formats with no header. I noted this in a previous log. There's an offset at 0x01BE that points to the MBR. My theory is this is true for "bigger" cards. I think the reason I could...
I've got the BIOS loading for Multi-boot Multicomp. It boots up to the Multi-boot prompt. > Available Commands: :ccxxxxiibbbbbb Load Intel-Hex file record Rxxxx Run from address xxxx Sddd System boot Iddd Init: Format directory Pddd[,xxxx] PutSys: write...
1. Toolchain not found After stepping away few days far from my PC for family reason, I resumed my activities on the Tsykuyomi project.So I started by reading the https://github.com/WHhkwong/SIPI_Bear_playback code and looking for a SNC7001A Toolchain/SDK...
The amazon fairy dropped off a "NES Classic Controller" and a "Classic Pro"The classic pro comes up as a classic controller, The only difference is the analog R and L on the one I have are buttons and just return the max value when pushed. Although this...
The 5.21E ROM works file with the current board, but the 7.11A ROM uses a different pin for the vertical sync signal. This can be fixed, but then the 5.21E ROM results in no display. Rather than fixing the hardware (with a jumper to be changed when the...
Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...
In a previous log I said, "I'm not going to overthink this. Random selection from the chess openings is working.". Well I lied. I am going to overthink this. (Well at least think it.) Something I should have done when working on the opening moves was...
Switching over to an ARM based solution is much better than an AVR+RTC chipset solution. Been looking at the STM32F030 chip and it is a perfect fit for this application! It has the following very desirable characteristics:32.768kHz oscillator on-chip....
This is an overview of the layout in which KGE works. Get User String (Round 0)Split String Into PairsIf Not Enough Then Add Specially Made Character Which Is Deleted During DecryptionUse Byte SubstitutionSwitch User Strings To IDs and Find Replacement...
While whizzing through the code trying to scrounge verified keyboard scan codes and flags, I found some some buried treasure in the form of an undocumented test routine. It's not that exciting -- it just fills the current file with some sample...