2800 Results for "%E3%80%8A%EC%B5%9C%EC%A0%80%EA%B0%80 O1O%CE%9E5793%CE%9E7458%E3%80%8B %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%E3%86%8B %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%85%94%EC%B8%A0%EB%A3%B8applause%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%EC%8B%9C%EC%8A%A4%ED%85%9C%EC%8B%A0%EC%82%AC%EC%95%84%EC%9D%B4%EB%A6%B0%EC%A3%BC%EB%8C%80caught %EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0%E3%8F%87%E3%85%97%EA%B0%95%EB%82%A8%EC%95%84%EC%9D%B4%EB%A6%B0queer"

The sun-tracking system: to have the parabol always facing the sun
Instructions from The Sun Heater
The sun tracking system consists of: 1. Two roller shutter/awning motors: These motors are industrial, easy to purchase, cheap, and with a high torque (10Nm being the lowest). Average price of each motor around 30€...

Soldering perfboard
Log from Earth Lander 84
I took a perfboard and soldered up power and the data/address busses of the MCU, SRAM, NVRAM and the address bus latch.I did't really care about the exact order of the bits when wiring them up, I just went for the easiest layout. I'm not really sure...

Update Code For Three Dollar EC PPM Meter for MCU [Arduino]
Log from Hacking the way to growing food
This code is a slight update of the last one, updated:>Better Uptime Counter>LCD Shield>New Pin out Diagram>Restart Protected Calibration Details>EU and US Plug Calibrated Probe Also a quick update to the code so the calibration value will survive a...

All Your ISA Belong to Me!
Log from DDL4-CPU
Before I began the layout of the DDL4-CPU, I came up with an initial Instruction Set Architecture (ISA) for the design. It went through several revisions as I was designing the boards and refined the components. Here at the last minute as I am...

In The Digital Domain
Log from Reverse-Engineering the milight on-air protocol
I also wanted to sniff the communication between the micro controller and radio IC, but couldn't get the case of the remote control open. At the next opportunity I brought the Mi-Light Wi-Fi controller with me and got that open more or less easily:Inside...

Updates
Log from Latitude E6400 Coreboot port
It's been nearly 2 years since my last log, and things are quite different from where I left it. I've been poking around at this project in between other projects and university, so most of these details are not recent. I found out that there has since...

Temperature sensors
Log from UltraTower
Temperature is important in soilless cultivation. Articles agree on an ideal growing temperature between 18°C and 26°C. A too cold temperature will slow down growth but increase the dissolved oxygen in the water. While too hot temperature will...

Temperature sensors
Log from UltraTower 2023
Temperature is important in soilless cultivation. Articles agree on an ideal growing temperature between 18°C and 26°C. A too cold temperature will slow down growth but increase the dissolved oxygen in the water. While too hot temperature will...

Salinity Measurement
Log from Vinduino, a wine grower's water saving project
SummarySalinity, or excess salt in the soil profile, is often called the "silent killer", because of the devastating effect salinity can have on irrigated agriculture. With increasing agricultural irrigation efficiency, there is a risk of salt build-up...

Change in Philosophy Regarding Nutrient Solution Replacement
Log from Hydroponic Garden Control with IUT
After a distraction from my yearly camping trip to AirVenture, getting ready to teach my Fall class and other Summer distractions it is becoming very clear that this project is actually for next Summer's growing season... That being said, through...

Attempted architecture redesign (2022-08-19)
Log from Linkia
Original date: 2022-08-19 Related tweets: [1] [2] The RF test PCB was submitted to the PCB factory. In the meantime, I was trying to redesign the architecture to mitigate the problems of the current design: Power consumption is not low enoughIt...

Reverse Engineering from Package Data
Log from Reverse Engineering a Drone
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...

Board NEDONAND-6
Log from NEDONAND homebrew computer
NEDONAND-6 is 8 multiplexers 2:1 with common control (straight select and inverted select):Board already ordered through OSHPark:Pins description:1.1) GND - ground 1.2) O0 - output of multiplexer 0 1.3) O1 - output of multiplexer 1 1.4) O2 - output of...

YGREC8
Details from YGREC8
After the explorations with #YGREC-РЭС15-bis, I reached several limits and I decided to scale it down as much as possible. And this one will be implemented both with relays and VHDL, since the YGREC8 is a great replacement for Microchip's PICs....

Remapping the Keyboard
Log from A DIY Keyboard
Remapping the KeyboardGiven most of the work is done with the "basic shift logic" how hard could it be?The basic shift logic:Well much harder than expected, here is the schematic:Now many will recognise this as a PLA (Programmable Logic Array).Designing...

|<
<
3
4
5
6
7
>
>|