I took a perfboard and soldered up power and the data/address busses of the MCU, SRAM, NVRAM and the address bus latch.I did't really care about the exact order of the bits when wiring them up, I just went for the easiest layout. I'm not really sure...
I have been growing leafy greens using Hydroponics for the last 3 years. I was tiered checking out for the nutrient levels and pH level of the nutrient water solution, so I decided to make a nutrient feeding unit to maintain the optimal nutrient level...
For quite some time I have been thinking about the possibility to using a laptop to run all the heavy OpenPlotter and OpenCPN stuff instead of using a Raspberry Pi. The performance of the RPi is... well it's usable but it's not a pleasant user experience....
Now that i know how to access and decode the data lets try the Raspi GATTTOOL default BLE handler:Native to Debian and a lso to a bunch of linux distros or so i've heard of . First i reset the bluetooth of the raspi, just in case: sudo service bluetooth...
Original forum discussion from January 2017: https://www.brutman.com/forums/viewtopic.php?f=1&t=607 One of the slots (2x15 contacts) of IBM PCjr are intended to be occupied by modem, so we can re-use it, because that modem was useless anyway ( 300...
In the Maker community there are projects to make Virtual Reality headsets to use with the PC, but these are for wired use, so there is room for a wireless solution that does not involve using a cell phone. Currently the best: https://hackaday.io/project/187343-easy-pancake-lensesAnd...
At the OHSummit, I was joined by Amber Cunningham, community manager of Tindie. While Hackaday and Tindie have the same overlords ruling over them, we can't really have Amber going around with a Hackaday logo on her badge, can we?...So I spent 15 minutes...
To implement the ESP-NOW Protocol, we first need to understand how it works in details. The datasheet doesn't say much on the really low level, especially on the acknowledgment behavior. To understand what ESP-NOW does, I use Wireshark with my PC Wifi...
I just got the pH portion of the circuit working. There actually wasn't anything wrong with the circuit. It turns out that the probe that I was initially was using was bad. I tried a different brand and it worked perfectly. The working probe is listed...
This is an overview of the layout in which KGE works. Get User String (Round 0)Split String Into PairsIf Not Enough Then Add Specially Made Character Which Is Deleted During DecryptionUse Byte SubstitutionSwitch User Strings To IDs and Find Replacement...
The first step in reverse-engineering any radio protocol is to listen to it on the air. The advent of software-defined radio makes this much, much, easier than before. For this project I've used a nuand bladeRF board and the GNURadio software stack,...
I have squeezed some simple instructions into a 16-byte ROM that writes 0x04 into the I/O address 0x00, and repeats (http://www.homebrew8088.com/):A: MOV AL, 04 OUT 00, AL JMP AThis is then converted into machine code (https://defuse.ca/online-x86-assembler.htm),...
Product features: support Beidou differential positioning and UWB positioning, automatic switching between indoor and outdoor high-precision positioning, positioning accuracy up to 2 cm outdoors, up to 10 cm indoor positioning accuracy, IP67 protection...
For some reason, EC probes are relatively expensive. In most cases they are more expensive than pH probes, which to me seem a lot harder to make. So, I decided to make my own EC probe, as you can see below:The contacts are gold plated Studex ear piercing...