Close

582 Results for "%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%EC%96%B4%EB%94%94%E3%80%8Coptime4%2Ccom%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC %EB%8C%80%EA%B5%AC%EB%A7%88%EC%82%AC%EC%A7%80 %E3%80%8D %EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%E1%99%9C %EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%EA%B1%B8%E1%99%9C %EB%8C%80%EA%B5%AC%ED%9C%B4%EA%B2%8C%ED%85%94 %EB%8C%80%EA%B5%AC%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

  • Fan controller for Re:Load Pro
  • Instructions     from Fan controller for Re:Load Pro
  • Make you the PCB and get the components and any standard 60mm 4-wire fan will probably do the job. I used a JMC "6015-12HB APW" that I had lying around. The exact the same fan is readily available on eBay.I used eagle to design my PCB, and the files...

  • Crazy Clock
  • Instructions     from Crazy Clock
  • Obtain a clock movement or remove the one from the clock you intend to modify. The recommended clock movement if you wish to start with a fresh one is the Quartex Q-80, available from Klockit. It's also the movement being used (at least at present) by...

  • Geiger–Müller Tubes

  • Instructions     from Cosmic Array
  • I've had comments regarding the validity of using Geiger–Müller Tubes for a cosmic ray (muon) detector. Pointing out that Photomultipliers and scintillation panels are best, and yes the are far more effective. However, they are also expensive,...

  • Step 13
  • Instructions     from Easy Diy Pencil Holder
  • Choose one object. Use Move tool to transfer it to center and set value 80 on Z axis, also transfer to center another object

  • Get a microSD card
  • Instructions     from TRS-80 Model 1 on a PIC32
  • get a 2 GB microSD, FAT formatted. (I think 2 GB is the max the driver will support; haven't tested with larger. Anyway, I suspect 2GB might be able to hold all the software ever written for the TRS-80, ever.  UPDATE:  it works with up to 32...

  • Step 10
  • Instructions     from DIY Decorative lamp | Home Decor Ideas
  •  Move camera under model and select Bottom Polygons with Right Mouse Button Then select Move Tool and set Y to 50 Select exactly the Foundation copy Then open Scale Tool and set X and Z to 80

  • Voices of the past, speak up!
  • Instructions     from Voices of the past, speak up!
  • You will need the text to speech board from Mikroelektronika: https://www.mikroe.com/text-to-speech-click Don’t forget to jumper it for 5 V! By default it is set of 3.3 V! You can solder it in directly, but make sure you have enough clearance for the...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday