90479 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

The PCBs arrived...mistakes where made
Log from GNSS module 2.0 - GNSS via Bluetooth
The PCB arrived and they look perfect, not that I had any doubt when ordering at a big Chinese manufacturer. And of course there are mistakes :/ The voltage regulator for USB power to the GPS chip U5 has the wrong footprint. I used a SOT-89-3 foot...

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

Housing selection
Log from tv-remote-elderly
Requirements Easily found when misplacedBig enough to hold easily but not too big that it's cumbersomeShould have a battery compartment so that unskilled personnel can replace batteries without having to open up the housingRoom enough for the necessary...

MIKBUG Commands
Log from MIKBUG on Multicomp
MIKBUG (Smithbug) has the following case-sensitive commands. ; V VIEW MEMORY; E CHANGE MEMORY; M MOVE MEMORY; I FILL MEMORY; F FIND ; D DISASSEMBLE CODE; & S1 LOAD PROGRAMME; G GO TO PROGRAM; J JUMP TO TARGET PROGRAM ; T TRACE PROGRAM; K CONTINUE...

Ordered Some More Parts
Log from Motion Controlled Cabinet Light
I decided that once I get this project working well, that I might make several for family and friends that might need something like this. To that end I placed an order for some HC-SR04 (Ultrasonic Ranging Module) and the HC-SR501 (PIR Sensor) modules...

FlexSEA-Plan
Log from FlexSEA: Wearable robotics toolkit
FlexSEA-Plan is an embedded computer used for high-level computing. It boasts a powerful processor and can run an operating system such as Linux. Developing code on this platform is similar to the regular (i.e. non-embedded) software development process....

Firmware development + Front Lights case
Log from Electric mountainboard with CAN bus + Android app
I modified Android application and Control Unit firmware so that front lights can also be controlled (brightness, blinking mode) via Bluetooth. Previously only rear lights settings were being sent from the phone. Now Control Unit receives all the settings...

Firmware update: Menu system and two-week battery life
Log from Color Open Source Smartwatch
I've redesigned the way screens/apps are handled and introduced a main menu. More importantly, I have managed to get the average current consumption down to 350-550uA (1.5mA previously)! Turns out a huge chunk of it - 800uA, was a bug in the TWI (I2C)...

All Your ISA Belong to Me!
Log from DDL4-CPU
Before I began the layout of the DDL4-CPU, I came up with an initial Instruction Set Architecture (ISA) for the design. It went through several revisions as I was designing the boards and refined the components. Here at the last minute as I am...

Keyboard Driver Almost Done
Log from Hackulator
I ended up using the key combination for On and Mode (it seemed appropriate) to change the mode, which basically is between TI-83 keyboard mode for the TI-83 emulator and Regular mode which allows through various submodes access to just about all of...

BME680 is weird
Log from When should I replace my A/C air filter?
So, working with the BME680 has left several odd impressions.1) The gas sensorNo idea what it is measuring, but it does measure something. For example, a Sharpie, immediately picked up. It reads in Ohms. Range seems to be around 10k...

Initial LED Selection
Log from E-Bike Light
When I set about this project the first thing I wanted to work out was what LED I was going to use, as this would drive the requirements of everything else in the project, driver, lens, heatsinking, etc. Due to personal preference I decided that I wanted...

Headband PCB - Version 0.89
Log from Open Tag
I sent out the Headband Sensor Package Version 0.89 PCB's to OSH Park, Got three purple PCB's back, and they look great! The top and bottom of the boards look pretty good. I could have flipped the resistor silkscreen (the R1, R2 and R3),...

Rev1 Voltage Test
Log from Multimeter
I did another test with the rev1 prototype, this time only measuring voltage, and bringing it all the way to the maximum voltage of 60V. Again I am doing calibration and comparison to my Fluke 101 Multimeter. This has a problem as the Fluke 101 does...

Beta units shipped
Log from Portable environmental monitor
After a sinuous but exciting road, the Beta prototype came out nice, the entire device is amazingly small: I was able to design it to fit the 110x70mm aluminium enclosure I planned initially without renouncing to any of the sensors nor reducing the 1500mAh...

|<
<
1
2
3
4
5
>
>|