Populate the board. You will need some good experience with 0805 SMD soldering, and some tools like soldering iron and hot air rework station. Start with the bottom side, with the microcontroller, the other ICs and finally the small passive components....
How to flash the chip.Download the package from the download page Run "ESP_Basic_Flasher.exe"Select Your com port number and flash memory size for your chip.Hook your ESP8266 module up in flashing configuration as shown.Click the "Firmware Flash" button.Wait...
The Arduino Micro Pro doesn't like to play with [Ken Shirriff]'s infrared library. [Link]Follow the instructions for installing this library. Once the library is installed, it must be modified to work our hardware. This troubled me and I followed forums...
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...
Labview and Arduino IntroductionLabVIEW (short for Laboratory Virtual Instrument Engineering Workbench) is a system-design platform and development environment for a visual programming language from National Instruments.To learn about LabView check official...
On the back of the LCD there is a reflector and a polarizer. This diagram shows the different layers.The reflector is a thin foil sheet on back of the polarizer. It needs to be removed so the backlight can shine through. The polarizer is a thicker plastic...