Close

90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남몰디브ㄿ 《〈 문의 OIO↗5793↗7458 》〉 ㄻaudienceピ몰디브가라오케신사동몰디브шshop 신사동몰디브강남몰디브가라오케 강남몰디브ら신사동몰디브♩safely⒞"

  • Power Strip Control (Safely)
  • Log     from Automated Garden MVP
  • In lieu of tapping into 110V AC power to control lights and watering, we decided to rig up a system that would physically control the ON/OFF button on a power strip. This way the entire project can run on the 5V power supplied by the Arduino and will...

  • Split breadboards into main and input device
  • Log     from explorad
  • The buttons were moved to an external input device (currently breadboarded), which now sits next to the main breadboard:The Teensy 3.1's inputs are 5V tolerant, so I can safely connect the Teensy 2.0's Tx pin to the Teensy 3.1's Rx pin without additional...

  • Condensation Issues
  • Log     from SuperVide
  • Peltier modules operate by creating a temperature differential, which means if we're using them to heat our water the other side will get cold.  Really cold.  When we warm it using a heatsink and fan we're going to get condensation.Due to this...

  • The speaker
  • Log     from Arduino controlled Bluetooth mp3 radio for moped
  • Last weekend I cut a hole in the side cover of the moped to place the speaker. The speaker is a water resistant Visaton FR 8WP-4SW for use in boats, cars etc. The PCB is already fully populated (pictures will follow). Next week I will finish the first...

  • Finally, getting started!
  • Log     from Jaguar XJ6 EV Conversion
  • I finally have my shed completed. While I don't have all the parts or tools required to do the work, at least I have somewhere to safely store the old girl as I pull her apart to fix all the rust etc that needs to be fixed up before it's roadworthy....

  • Updating updating
  • Log     from Ladon Project
  • The detailed description is woefully out of date, so I am updating it in stages. Then I'll write a nice long log about all the fun we've had with sails. If you don't want to wait for all that, come to Seattle Mini Maker Faire next weekend (Sept 16-17)...

  • Motor Purchased and Mount Underway
  • Log     from 3D Printed Axial Compressor
  • So I pulled the trigger and purchased a brushless motor with an ESC. This one to be specific. This one "should" be able to spin at 30k with a 2S LiPo under the weight of the rotors. So now I'm designing and printing the mounts and stands for the compressor...

  • How does it work?

  • Log     from Spectra: Open Biomedical Imaging
  • Different tissue types have different impedances, so when you send an AC current through it will take different paths dependent on the material that is in it's way. The picture below describes the basic re-routing that is done by current that enables...

  • Lunar Lander
  • Log     from LM80C Color Computer
  • After a while, I'm come back with another conversion. Today is time for LUNAR LANDER, since this year is the 50th anniversary of the first landing on the moon.In this game you control the thrust of a LEM module: you'll have to try to safely land of our...

  • Class 1: First Light
  • Log     from LED Programming With Arduino & FastLED
  • Class 1: First Light. Includes the following topics: What are LEDs? Programmable LEDs, including different common products (matrix, strips, pixel modules, neopixel rings) and how to power them safely. Ohm's law, circuits, current, and resistors. How...

  • assembly and first test
  • Log     from electrical energy monitor
  • I soldered the three analog to digital converter on a perfboard and connected it to 5V, GND and the I2C interface. After that, I added three 3,5mm jack sockets (which I harvested from an old PCI sound card). The three jack sockets are connected with...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday