27106 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

Draw
Instructions from Recreate lost or broken plastic items
Draw the new design using the numbers you obtained from the measurements. I used AutoCAD for this example but there are plenty of solid generating softwares out there.

Gearwheels assembly
Instructions from Universal Speed Reducer
Components list : 1 x Gearwheel 20 teeth1 x Gearwheel 19 teeth2 x Roller Bearing 8x22x76 x Screw M3x10 Insert the roller bearing in each gearwheel 2. Screw the six M3x10

Print parts
Instructions from Unpluginator
My motor already had a gear attached, but it was tiny and would have caused some issues with a normal 3d print. For the matching gear, I halved the extruded line thickness on the outer edge, to ensure tolerances were ok. Worked fine. For the remaining...

Pallette
Instructions from Pallette
http://website.palette.io.s3-website-us-east-1.amazonaws.com/mouthguard.htmlMouthguardWhat you will needSisu Mouthguard Fork Bowl Hot water MirrorTo begin assembling Pallette, you'll need to obtain the form of your top teeth. We'll use the mouthguard...

Installing the Ball End into the Jaw
Instructions from 3-Axis Skull Mod for 12ft Skeleton
Depending on the type of linkage you are using for the jaw, you will need to make a small hole near the back of the teeth for the linkage to attach. From here, test and adjust the linkage for the jaw to make sure you can close the jaw completely...

Mechanicals
Instructions from Basic Farm Robot 2021
In previous projects we spent a lot of time designing and building the mechanical systems and we really wanted to short cut all the hard work by using a ready made system that could be bought reasonably cheaply 'off the shelf'. We looked at mobility...

Pallette
Instructions from Pallette
http://website.palette.io.s3-website-us-east-1.amazonaws.com/imprint.htmlImprintWhat you will needMolded Mouthguard (from Step 3) Air-Dry Clay Medium Power Heat GunWith the molded mouthguard from Step 3, we'll make a clay imprint of your top teeth. This...

2. Build up levers
Instructions from 6-Axis Micro Manipulator
The levers and motor gears need to be printed using a high resolution method such as SLS nylon. This is because of the detail needed in the shape of the gear teeth (involute) that allows the set to move smoothly. Fit the PTFE bush into the pivot hole,...

Create a Custom Dental Impression - Alginate Negative Impression
Instructions from Intraoral Respiration Monitor & Overdose Detector
The respiration monitor electronics are built into a clear ultra-thin custom retainer. This retainer keeps the sensors and other electronics correctly positioned and also acts as a protective barrier between the electronics and the sensitive skin inside...

OPTIONAL Remove the Main PCB From the Internal Enclosure
Instructions from Hacking Wearables for Mental Health and More
The PCB test pads that you need to solder are on the exposed side the the PCB, but all those cool chips are on the hidden reverse side. If you are like me you will definitely want to take a look. Carefully push back the plastic teeth retaining the PCB....

Assembling right side
Instructions from BrailleRAP DIY Braille embosser
Fix 3d printed parts BOTTOM_AXIS_right and TOP_AXIS_right on the frame with M3 washers M3 Nyl nuts and M3-14 Fix 3D printed parts KP08_support and KP08 on the frame with M5 washers M5 Nyl nuts and M5-25 screw Fix a KFL08 with M5 washers...

Ambilight
Instructions from Ambilight
Setup hardwarePC -> DMXPipe -> SOUNDSATION PAR64B-ENTRYIf your hardware differs, you need to modify sources. There is plenty of comments, so don't worry. Just be sure you are using DMX controller with FTDI inside. If not, this project is not going to...

Assembling
Instructions from Steam Controller mod: ABXY buttons on the left
I've put everything back together making sure the wires don't obstruct anything. Luckily there is plenty of gaps inside Steam Controller.

Mounting the Button & LED
Instructions from Pentesting BBU Dropbox
Mount the LED where the "Wiring Fault" LED was and cover it in plenty of hot glue. Mount the push button with lots of hot glue where the "Reset" breaker button was.

Solarmodule preparation
Instructions from I<3T
Carefully put solar module on some soft underground so the front does not scratch. Then cut the long wire to around 50cm (see backside image as reference). Everything will be put in the back of the panel and there is plenty of room.

|<
<
1
2
3
4
5
>
>|