90479 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

The New Model
Log from Open Indirect Ophthalmoscope
The design models have been 3D printed and assembled. We made two devices, only the outer casings are different in the two models. One is printed on a SLS 3d printer (Nylon PA-12) and another one with an FDM 3D printer (PLA Black).Both the models are...

Timing troubles
Log from neopixel clock
Few hours fiddling with code this afternoon.Have dropped brightness to 1/32 of full power! Doesn't leave a lot of room for going dimmer.Deciding how to actually display the time is quite tricky in itself. I have an inner ring with 12 leds and outer with...

Oh No! *Pop*
Log from FLED
So just after presidents day we came back into the office and found that the FLED was dead! Turned it on and nothing happened. After eliminating the ATX PSU from the equation it became clear we would need to pull the display down and open it up to find...

Live and Learn
Log from Roadrunner (the Arduino-Tiva)
The boards arrived on Saturday. I finally had time to sit down Monday night and begin populating one. Full disclosure, this was my first time doing and fine pitch or SMT work. I began by doing a full electrical test on one of the boards, which it passed....

OS Upgrade and introduction of WiFi enabled device
Log from Open Indirect Ophthalmoscope
This log includes major upgrades included in the current system.Till now we had been using an older OS incompatible with RPi 3 since the display could have only worked with that image. Additionally it caused the trouble where the onboard or external...

WiFi issues resolved
Log from Wink Hub Hacking
I have had nothing but trouble getting the hub to connect and stay connected to my wireless router. I recently figured out the cause. I had placed my hub about ~5 ft from my router, and evidently that was close enough to saturate the hub's wifi radio....

Modelling in the MapleSim Environment
Log from Object Following Control of a Robotic Camera Arm
As the first step of this project, kinematic model of the robot manipulator is derived. Then using the inverse kinematic equations, a given trajectory (shown by the red line) is followed while the camera (represented by the blue arrow) tracks the object....

Megsy #2 Construction
Log from Megsy? A homebrew Teensy 3++
I've been having some trouble with the first Megsy / Teensy 3.2 / Teensy Audio Board stack, and thought perhaps it would be a good time to try to solder together a 2nd Megsy board. Originally, I had intended to try to hand apply solder paste, and apply...

Design Choices
Log from Pokey Watch
This is just a brief discussion of some of the choices that were made in the design of this project.First and foremost, everything was designed to be fabricated and assembled by me, "in house" so to speak. That meant that any chips had to be hand-solderable,...

Notes on usage
Log from Spring clamp third hand for hand soldering SMDs
Having done a bit of SMD work with this device now it's worth passing a few comments. First of all it makes an amazing amount of difference to SMD soldering in general. I find myself no longer using the magnifier because the component is securely held...

Removing undesired reflections/spots
Log from Open Indirect Ophthalmoscope
Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

November 2014 - Designing a prototype source pt. 3
Log from Low Cost X-Ray Systems for Developing Nations
Around the end of October, I finished up the design of all the plastic components which would house the electronics of a 200W x-ray system. It was now time to design those electronics!Back in September, I had an idea of how I should go about doing this....

Design Considerations
Log from Open Indirect Ophthalmoscope
Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

First post
Log from Pokey Watch
This project was underway before I actually was on Hackaday.io, so a quick summary of where things stand:-The PCB seems to be functional. It milled just fine and there weren't any assembly issues.-The software is at a rough prototype stage. It has a...

Update. And a Warning...
Log from Custom Christmas Light Display
My strings of GE Color Effects are quite old - purchased in 2010. Evidently in the past couple of years, they have changed the lights to a style which is not hackable. The new lights have 2 wires per bulb/pixel (one in, one out), which provides...

1
2
3
4
5
>
>|