917 Results for "3D printing"

3d Printing
Instructions from Robo Roach Wrestling

3D Printing
Instructions from Hive Lamp
Print all the parts according to 3d-printing-assembly.pdf file.The resolution of the print is depends on your available time. The finer you print the better it gets and less sanding at the end.

3D printing of components
Instructions from AutoDuct smart motorized air duct shutter
Print all components with PLA or higher-grade material.

3D Printing
Instructions from Wombatics Otto
3D Printing SettingLayer Height : 0.2mmOutline Shells : 3Fill : 10%Supports: No STL Files2 x OttoDIY_foot_v08.stl2 x OttoDIY_Leg_v08.stl1 x Wombatics Otto Body.stl1 x Wombatics Otto Head.stl

3D Printing
Instructions from Modular Universal Jamming Gripper
3D print the required components. All files can be found at: https://github.com/Team-Automata/Modular-Universal-Jamming-Gripper/tree/master/3D%20Printer%20Files. Print all .stl files found in this folder.

3D printing
Instructions from Making PCBs with 3D printed stencil and UV paint
Now the STL file should be sliced in favourite slicer (i used Cura) and 3D printed. The file can be mirrored before printing if necessary. I'm using some expansion options to make the holes and clereances a bit larger: Horizontal Expansion -0.04mmInitial...

3D printing
Instructions from Minimalist Rover/ Satellite
When we had finished the satellite, we decided it would be nice to place it in its natural environment. That's why we decided to 3D print a model of the moon's surface.

3D print instructions
Instructions from PionEar: Making Roads Safer for Deaf Drivers
Few instructions for the 3D printing of the provided housing. Preferably use PETG material for printing the housing and car holder because of its higher temperature resistance, which is advantageous for use in the interior of the car. For reference I...

3D Printing:
Instructions from RGB HexMatrix | IOT Clock
3D print all given 3D models.Print the screen layer in white PLA.

3D Printing:
Instructions from DIY Arduino Tic Toc Toe Game
3D print all the parts provided in the link below.3D Print 16 small button in white PLA and remaining parts can be 3D printed in any color you want.After printing all the parts install all the 16 white buttons in the array using some fast glue.

3D Printing
Instructions from 3D Printed Audio Exciter
3D Print each of the components in the .zip file. These include the coil bobbin (top and bottom), Speaker "cone", and speaker "back". Be particularly careful when you pull the speaker cone off the bed! I found that pulling the glass...

3D Printing Your Case
Instructions from How to make your own 3D Printed Raspberry Pi cases
Once you have your design and material, it's time to start printing. You'll need to use a 3D printer, of course, and there are a few things you need to keep in mind. First, you'll need to make sure your printer is properly calibrated. Second, you'll...

3D Printing
Instructions from Pixo | Dazzling Desk Display
Now, I've got the Pixo enclosure and back cover 3D-printed, both of which I designed. I utilized the Anycubic Neo 3D printer with a 2mm layer height. Take note: in my design, the enclosure and diffuser are part of the same body, allowing for a seamless...

3D Printing
Instructions from Positivitypunk Backpack
To print bolt holes, offset from the plane of the printer, I created 4 cylinders and aligned them a layer or two below where the hole would start to print. Each cylinder is a solid model, two layers thick. Once sliced, support will not need to be generated,...

3D Printing
Instructions from DIY Solar Bottle Lamp
I have used my Creality CR-10 Mini printer and 1.75 mm PTEG filaments to print the parts. I have printed it in 3 different colors yellow, Orange and Cyan. The diffuser is printed in the transparent filament. You need a support structure for printing...

1
2
3
4
5
>
>|