3524 Results for "3D printing"

3D printing the enclosure
Log from OpenHAP
As we needed to test the enclosure fitting prior to choosing extruded aluminum, we settled for 3D printing as we could get our prints with a 2 day lead time. We chose Cubic 3D as our printing partner. They offer affordable printing services in Kenya...

Phase 2
Log from ZemiCharmed Life
Semicopacetic 3D printing mockups progress.

3D Printed Case Design
Log from Color Handheld Gamer Prototype
Ordered my first ever 3D printed design today for this project and due to be shipped later this month. Used gmax 3D modelling software (3DStudio Max Lite) and the cost for 3D printing and shipping was $40 for 2 units in black.

3D Printing
Log from Affordable bionic prosthesis
With over 20 3D printed parts, this was a long process. The printer used is an Anycubic Kossel Delta. 0.15 mm layer height. Just regular PLA+. Different infill and parameter configurations for different pieces.Overall printing time was about a week....

More 3D-printing
Log from Ardumower Arctic Hare X2
Front nose 1/2 just finished! Right side is almost completed.Body assembly Body on chassischarging pin

3D Printing of the arms pt.2
Log from Robô da Alegria ("Joy Robot")
The second part of the left robot arm was printed in 3D using PLA with low density and spacing of 0.3mm between layers in a total printing time of about three hours.A segunda peça do braço esquerdo do robô foi impressa em 3D utilizando...

3D printer function development is over
Log from HelloPrinter
After 2 years of perfecting the 3D printing function while working on the structure to withstand the CNC function we are finally finished.The next step in the roadmap is to develop the Universal Endless Paste Extruder. We hope to have news about it next...

3D Printing
Log from DSKY
3D Printing: Having never owned a 3D printer, I purchased a printer and started taking my modeling abilities to the next level. After learning a few important lessons in 3D printing (mistakes), I was up and running. It takes a day or more...

3D Printer
Log from Open Source Underwater Distributed Sensor Network
I haven't updated in awhile. I got a new job this summer working for a startup, and moved cross country to Florida. That soaked up most of my time, but I have made some progress on the project. Given my limited time, I made a big mistake with how I...

3D printed prototype
Log from 3D Printed Parametric Motor
Finally, I got around printing the first motor prototype. The frame is here, I still need to find the coil, a 5mm shaft, screws and possibly bearings. I have some small magnets that should do it for the proof of concept.The stator coil holders were printed...

Happiness, Scaling, 3D Printing
Log from Dementia-friendly music player
It's been a fun few days on the project.I spoke with a group that connects non-profits with needs to makers with skills. That could turn out to be a really good way to get more dementia-friendly music players to people that need them.I talked with a...

3D MultiTool
Log from We Should be Free to Tour the Solar System
When I envision an ultimately autonomous factory, its primary ingredients would be:1. 3D Multi tools (more on this below)2. Mobile robots facilitating the multi tool operations3. Metal casting equipment4. Specialized equipment for doing what the above cannot...

Part 2: 3D printing
Log from Tesla Key Watch
First thing I designed was the new F-91W chassis Obviously it took me a few tries to make the new chassis fit properly. Well... maybe more than "a few". This process was made way easier thanks to N-O-D-E sharing his project files. Then, to make my life...

Part 2: 3D printing
Log from Tesla Key Watch
First thing I designed was the new F-91W chassis Obviously it took me a few tries to make the new chassis fit properly. Well... maybe more than "a few". This process was made way easier thanks to N-O-D-E sharing his project files. Then, to make my life...

Printing on 3D prints
Log from UV projection printer for PCBs and item marking
Here is a test print on a 3D-printed PETG panel:I started by coating the panel with some UV paint.This is the mask that will be used:I exposed the mask for 25 minutes:Cleaning-up the unexposed paint:The letters and lines came out pretty thick, that may...

1
2
3
4
5
>
>|