7648 Results for "3D printing"

3D Printed Flying wing FPV Drone
Project by K+
In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.
- 825
- 18

3D Printed Enclosure/Body for 2 Pin Plug
Project by Amal Mathew
Using 3D Printing to replace or build plug body for 2 pin plug.
- 168
- 1

1 Million Bottle Cap 3D Printer
Project by Sam Wechsler
Large Pellet Extruder 3D Printer - Prints with Shredded Bottle Caps
- 9
- 8

Easy cyclone for your shopvac with 3D printing
Project by Audrey Robinel
quickly create a cyclone dust separator with 2 buckets and a few 3D printed parts.
- 864
- 7

3D Print Babbage's Difference Engine No.2
Project by MechRedPanda
A fully functional replica of Charles Babbage's Difference Engine No.2 with 3D printed parts
- 28
- 32

High-density large 3D printer array
Project by Ampeater
Multiple large volume 3D printers stacked vertically
- 242
- 1

Bloft Mk2 - 3D printer for plastic waste
Project by Atte Linna
An open source large format 3D-printer for plastic re-/upcycling
- 75
- 38

Atlas - 6DOF 3D printed universal robot
Project by Damian Lickindorf
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
- 2.3k
- 562

High-Viscosity 3D printer (1)
Project by Jung Hoon Lee
My High-School project
- 409
- 1

DIY Polishing Station for 3d-printed Parts
Project by chiz
A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier.
- 2.5k
- 30

Smart 3D Printer Emission Monitor
Project by Gary Peng
Monitor the emission of toxic chemicals from 3D Printing
- 1.5k
- 72

ZeroPointModule a Zero 2 W carrier for 3D printing
Project by pkElectronics
Lightweight but powerful carrier board for the Raspberry Pi Zero 2 W - Powerful DCDC Converter | CAN-Toolhead Interface | lots of GPIO
- 12
- 11

Goats vs Llamas - a New Downloadable 3D Board Game
Project by jude_pullen
This game is an exploration of how much you can do by downloading a game - using both a paper-printer and a 3D printer.
- 4
- 6

Octoshield
Project by GOODWIN
Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.
- 1.7k
- 15

Programmable color filament (thermochromic)
Project by mmiscool
Print 2 color objects from a stock unmodified 3d printer using the hot end temperature to set the color.
- 1
- 5

|<
<
2
3
4
5
6
>
>|