823 Results for "3D printing"

DIY Savonious Wind Turbine
Details from DIY Savonious Wind Turbine
Academic research has shown that a Savonious windmill design with: 2:1 aspect (height:width); 10% blade overlap; and a stack of 3 sets of half-cylinder blades offset by 120 degrees is within a few percent of the efficiency of more exotic shapes for Savonious...

miniFuge
Details from miniFuge
This was one of the first things I 3D printed after a free-for-all 3D printer was introduced where I worked (in the office of information technology) at Duke. I was immediately hooked. I ended up entering this in the Innovation Co-Lab's 3D Printing challenge...

DIY Collapsing Light Saber with RGB LED
Details from DIY Collapsing Light Saber with RGB LED
Recently I got obssesed with 3D printing, and stumble upon this collapsing light saber I find it really cool and a great practice for 3D printing beginners, so I 3D printed this with my Ender 3 V2 and with yellow and silver filament and the...

Reachy: Open Source Humanoid Robot
Details from Reachy: Open Source Humanoid Robot
The Robotics CoLab at Circuit Launch undertook building Reachy in the Fall 12 week session. This open source robotics platform is available from Pollen Robotics and CoLab undertook building it from scratch. There were lots of challenges as Reachy is...

3D Print High Strength Pulley System(Block&Tackle)
Details from 3D Print High Strength Pulley System(Block&Tackle)
Since the design is modular, you can obtain mechanical advantage at different rates by using any number of rollers and blocks. In order to gain this mechanical advantage, I designed this block and tackle system with fusion360. I used 8 reels and 10 blocks...

3D Printed Open Source UPcycler : SHRED-Buddy3D
Details from 3D Printed Open Source UPcycler : SHRED-Buddy3D
Open Source SHRED-Buddy3D UPcycler turns leftover filament bits, bottles & fishing line into pellets for 3D printing. Designed by http://www.venture-bit.com-What ? Shred-Buddy3D? What can it do? Producing Flakes / Pellets / Granules:Leftover 3D Printer...

Design for 3D Printing Hack Chat
Details from Design for 3D Printing Hack Chat
Eric Utley will host the Hack Chat on Wednesday, May 24 at noon Pacific. Time zones got you down? Try our handy time zone converter. Like a lot of enabling technologies, 3D printing has had a strange trajectory. It started out as a laboratory oddity,...

DeltaBionics Rev0.1
Details from DeltaBionics Rev0.1
DESIGN OF THE STRUCTURE Statement of the problem You need to find a compromise between a number of characteristics to design a prosthesis and need to prioritise between them to do this. As described above the direct purpose of the project is developing...

3droutes
Details from 3droutes
As an avid sports competitor (representing GB as an age group athlete in 10 ITU/ETU Duathlon/Triathlon championships), I have spent a lot of time collecting data for all my sporting activities and like most people in this arena upload their data to Strava...

Jellybean3D Printed Car
Details from Jellybean3D Printed Car
This is an experimental project that aims to explore the limits of hobby 3D printing.This project does not aim to reproduce a standard vehicle construction. Many things can go wrong, but we will enjoy and learn through the process. :)Any suggestion...

Fusion 360 for 3D-Printing Hack Chat
Details from Fusion 360 for 3D-Printing Hack Chat
Vladimir Mariano from the popular "Desktop Makes" YouTube channel will host the Hack Chat on Wednesday, June 12, 2019 at noon Pacific time. Time zones got you down? Here's a handy time converter! There's no way to overstate the importance of...

UP300 Review and hacking for silent operation
Details from UP300 Review and hacking for silent operation
Hello, Today I finally had some free time to take a closer look at UP300. It is new 3D printer from Tiertime. This printer is huge. Shipping box itself was 45kg and I was unable to take it home in my car, I had to take out printer out of shipping box...

Omniprinter - #Swarm 'Large Scale 3D Printing'
Details from Omniprinter - #Swarm 'Large Scale 3D Printing'
The Omniprinter is designed for large scale 3D printing, it supports conventional extrudeable materials (plastics, ceramics, clay, concrete & pastes) this morphology allows for a virtually unlimited range in the X-axis, while the Y-axis has some mechanical...

ARX Hand Project X1S
Details from ARX Hand Project X1S
ARX MK0S This is the servo variant of the ARX Hand Project which focuses on being an easy to develop robotic hand using common RC servos that can be easily sourced and controlled. ARX MK0 Variants MK0 - https://hackaday.io/project/167785Main...

SALEM - Construction 3D Printing
Details from SALEM - Construction 3D Printing
Construction 3D Printing SALEM is a form of Construction 3D printing, a relatively new method of Additive Manufacturing aimed at producing large objects for construction purposes. The general principle of Construction 3D Printing (C3DP) is the same...

1
2
3
4
5
>
>|