24 Results for "3D printing"

OpenBionics Affordable Prosthetic Hands
Project by OpenBionics
Affordable, light-weight, anthropomorphic prosthetic hands, using a novel selectively-lockable differential mechanism.
- 1.8k
- 174

Soft Robotics Modules
Project by Nelson Phillips
A modular design for a soft robotic molds.
- 1k
- 8

Dextra
Project by Alvaro Villoslada
Open-source myoelectric hand prosthesis
- 645
- 89

evive: a prototyping platform for makers
Project by Dhrupal R Shah
An open-source Arduino based toolkit to learn, build & debug electronics and robotics projects
- 675
- 86

Vision-Based Grasp Learning for Prosthetics
Project by Stephanie Stoll
Building an intelligent, highly-functioning hand prosthetic on the cheap using the power of deep learning.
- 23
- 24

3D Printed Ball Screw Actuator
Project by Jeff
3D printed ball screw actuator focusing on minimal cost.
- 1.2k
- 13

PyBot SCARA Robotic Arm (3D printed + Python)
Project by jjrobots.com
OPEN SOURCE / 3D printed robot. Arduino M0 based and created using common elements from the Makers/ 3D printers World.
- 87
- 73

3D-printable strain wave gearbox - harmonic drive
Project by Brian Brocken
3D-printed strain wave gearbox strong enough to pull a car forwards.
- 13
- 13

3D printed high torque servo/gearbox Version 2
Project by Brian Brocken
An almost completely 3D-printed servo which is able to pull a car forwards.
- 82
- 83

3D Printed Magnetic Wobbling Gearbox with CV joint
Project by Paul Gould
11:1 reduction single stage gearbox. Theoretically Zero friction, Zero Backlash
- 16
- 9

Kame, ESP8266 based quadruped
Project by Javier Isabel
Kame is a quadruped robot with 8 servos and an ESP8266
- 1k
- 165

NoodleFeet's Gripping Toes
Project by Sarah Petkus
Some robots should have retractable toes...
- 1.4k
- 33

Valify V2 Robot Lawnmower
Project by Robin Fröjd
3D Printed Jetson TX2 based robotic lawnmower aims to build an "smart" robotic lawnmower using open technology
- 125
- 87

Quadrupedal robot M1
Project by Cedric Millecamp
Self made quadrupedal robot in progress. Every part is designed in fusion 360 and then 3d printed with an ender 3 pro and a resin printer.
- 16
- 12

Balambér
Project by borazslo
a robotic handpuppet
- 487
- 6

1
2
>
>|