Close

23324 Results for "3D printing"

  • Neopixel Watch Progress: Fall of 2016

  • Log     from Arduino Neopixel Watch
  • The project was shelved for a few months, due to not knowing how to continue and improve on the design in a way that could be accomplished at the time, mostly due to budget constraints and not having access to a 3D printer over the summer.During this...

  • STEP 5.0 - Last touch

  • Instructions     from Disabled / Quadriplegic Mouse Concept
  • I cut off rest parts from scroll, because they took up too much space. And I glued all part with glue. To mount top and bottom I used a gray tape. This is first prototype so I keep this simple. It's working, idea is good, but for now I know that in Mouse...

  • Bill of materials
  • Log     from LED Matrix Watch
  • In link below you can find complete bill of materials for electronic modules. Bill of materials of the complete assembly can be found in attached files. Project cost (approximation): Electronic components ~35$. 3D print of enclosure ~15$. Li-Po...

  • Temperature Behavior
  • Log     from TerraPreta
  • Our TerraPreta Biochar Prototype Reactor is ready to be operated, and our first task after have assembled it is to do a Temperature Behavior to understand how the flows of heat are present in the system and what are the range of temperature we are able...

  • Run of AnanasStepper 1.0
  • Log     from AnanasStepper 2.0 - 3.0
  • I test the closed loop printer http://v.youku.com/v_show/id_XMTUzODI0NDE0OA==.htmlthe printer can back the right position , After I draged the carrier to a wrong positon.And this is the testing example of my 3D printer.And this the open loop one.The...

  • Eye detail
  • Log     from Star Wars: BT-1 the Blastomech
  • I want to make BT's eye interesting and true to the comic. I didn't realize it before but BT does have a lot of symmetry with the tubing behind the eye. It's one of the most consistent things about his design. I tried to emulate that as best I could...

  • Getting the LCDs together
  • Log     from Your Personal Flight Simulator
  • I have been recovering LCDs from old or dead laptops for some time. Here is one of them. I have built 4 of these so far of different sizes. I 3D Print these very light enclosures that I also support with acrylic sheet. 3 or 4 of these can be mounted...

  • New Electronics + App!
  • Log     from Tipo : Braille Smartphone Keypad
  • Redesigned electronics to use Silicon pad's instead of the push buttons used before to have a soft yet tactile experience, and way lesser noise. The position of the buttons have also been moves so as to grip the smartphone better. We are expecting...

  • SW Makers Busselton 2017 Event
  • Log     from SW Makers Busselton Create Day
  • Programming up a notification CNC routed LED board for a 16 Raspberry Pi cluster project:Doodling around with a 3D pen:Tufting a charity quilt:This robot project will eventually be able to be programmed in various languages, eg: Logo, Picaxe, Python,...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday