9 Results for "A9G"

A9G firmware update ports
Log from Zero A9G GPS tracker
Recently we got many customers’ feedback about the A9G module, that how to upgrade the A9G firmware, as Aithink released new version firmware. That we released the Maduino A9G 2.0, with A9G module firmware upgrade port added: 1. The...

Project Log
Log from ESP8266 Publish Data to ThingSpeak without Wi-Fi
1. MQTT AT command of A9/A9G 2. Hardware Prepare 3. Software Prepare

MQTT Test
Log from wind weather station
Since the first debug, the sensors were working fine, and the measurements could be displayed on the LCD. After it, I would test the A9G module working, I had prepared a SIM card for the A9G module to connect the network. First, I had to program the...

Verify
Log from wind weather station
Before starting to design, I had made a project with multiple modules to verify. The modules I prepared: Maduino A9G moduleAn anemometerDHT11 moduleBuzzerI use the A9G module to report the data with MQTT, and use the ESP32 module with a display to subscribe...

Problems in V3.4 Testing
Log from IOT- SIM808 GPS Tracker Based on Arduino
Serious problems in the testing of V3.4 version. As the testing, the max current can be upto 2.5A when SIM808 powerup.. the 3.4 DC power circuit do not bears so big transient current, that make the SIM808 do not powered up .:-(.. although this...

Update to V3.4 Verson
Log from IOT- SIM808 GPS Tracker Based on Arduino
Updates in the version 3: 1. Power circuit update: previously a 3.7v battery is needed as the A9G power supply. in the new version 3, the module can be powered either by battery , or directly by USB. 2. Battery voltage Monitor, to check the battery...

Updated to V3
Log from Zero A9G GPS tracker
Updates in the version 3: 1. Power circuit update: previously a 3.7v battery is needed as the A9G power supply. in the new version 3, the module can be powered either by battery , or directly by USB. 2. Battery voltage Monitor, to check the battery...

IOT project List
Log from WiFi + GPRS + GPS tracking, all in one?
With this board, we will make lots of IOT project. 1. A9G Publish DHT11 temperature and humidity to ThingSpeak via MQTT 2.Make a GPS Tracker. 3.ESP8266 Publishing DHT11 Readings with MQTT to Raspberry Pi 4.ESP8266 Publishing DHT22 Readings...

Getting Air Quality Data to the Map & Reverse Geocoding
Log from The Interactive Air Quality Map
The Air quality map currently gets all its air quality data from the DesignSpark Environmental Sensor Development Kit (ESDK), the data is being reported via MQTT to the Arduino WIFI 1010 on the map, the map reacts to data on a per area basis, and although...