The display is comprised of 5x 1" Ferranti Packard FP-00SS5-7 units. I picked these up as new-old-stock on eBay, but they're also currently manufactured to the original spec as Alfa-Zeta S7S.
6 x odrive (24v, custom firmware) 1 x teensy 4 1 x mpu6050 Hip Adductors: 4 x 8308 with 7:1 reduction Shoulders: 4 x 8318 with 5:1 reduction Knees: 4 x 8308 with 7:1 reduction * 1.5x via chain/sprocket
PZEM-016 are normally RS485, I modified them to be UART 3.3V compatible- Remove MAX485 IC- Short-circuit pin 1 to 7 of MAX485- Short-circuit pin 4 to 6 of MAX485- R 3k3 0805 between pin 5 and 7 of MAX485 (do warn of short-circuits under resistor on pin...
Inline module consisting of arm soc and nordic BLE to observe and initiate door bell events. First version will support Android 4.4+ and iOS 7 devices which are enabled with Bluetooth 4.0.
7 "screen which has 2 versions of resolution, 1024*600 and 800*480, the different resolutions will affect the display on the same size screen, and the 1024*600 is used in this project.
Hardware:The end-goal is to make a custom PCB with a barebones Arduino setup + a multiplexed 7 segment display, basic power regulation and a RTC. For starters it's using pre-built breakouts.Software:The code is written in C++ using the Arduino IDE. The...
We have 24/7 access for members and meet for an open evening every Tuesday night (7-9 pm) at 65, New Rd, Basingstoke RG21 7PW.www.basingstokemakerspace.org.uk BasingstokeMakerspace on Facebook @BSK_Makerspace on Twitter
There are better ways to drive 7-segment LEDs but sins I already have a bunch of 74HC595 shift registers I use them. My board are straightforward three 7-seg's, shift register and resistors. PCBs are made by PcbWay.
The following item are required to proceed with the installation : USB 3.0 Drive ( Works with 2.0, a very fast drive saves time )Windows 7 ISOMain ComputerTarget Computer USB Drive Setup A USB drive with the WIndows 7 Installation can be created from ...