Close

23 Results for "EPM240"

  • Getting back to it.

  • I have been away for a while. In that time I have started using a different computer. I don't know how much is recoverable from the old one. I now have the Altera and Xilinx platforms on my laptop. I re-did some of the VHDL. I found that the character...
  • Tested the EPM570 PCB version!

  • At last I've assembled and tested the EPM570 PCB version: In the back of the PCB there is a short reminder about the solder jumpers you must use for the EPM570. In this case you need to populate C31 and C35 too (see the schematic). Of course in the Quartus...
  • Initial design considerations

  • Motorola has published Application Note ANE426 describing a minimal system based on the MC68030.It consists of the following:MC68030 running at 20 MhzMC68681 Dual UARTMC68230 Parallel Interface / Timer8 x 6164 8 KB SRAM2 x 27512 64 KB EPROMPAL16L8 for...
  • A Wire-Wrap test bed.

  • OK, this log will take a couple of days to get through. I have work out the timing which is complex. The original TRS-80 had separate Character ROM and separate Video RAM. I intend to use only one ROM (FLASH) chip and one (S)RAM chip. So the FLASH will...
  • Logic Analysers, CPLDs and Dunning-Kruger

  • It’s been a few weeks since my last update on this project. This is partly because I’ve been waiting for a couple of bits to arrive, specifically a logic analyser based on the CY7C68013A and an Altera MAX II EPM240 board. But to be honest, the delay...
  • Prerequisites and software

  • Sometimes, when making your own devices on microcontrollers, there is a need to display huge amounts of information on a display and to use a bigger screen for ease of perception. Unfortunately, there are no ready-made and budget-friendly solutions for...
  • VGA videocard for microcontrollers. Part 1

  • Sometimes, when making your own devices on microcontrollers, there is a need to display huge amounts of information on a display and to use a bigger screen for ease of perception. Unfortunately, there are no ready-made and budget-friendly solutions for...
  • MEDICAL VENTILATOR +STONE TOUCH SCREEN +STM32

  • notes: Here we want to make a project for the medical ventilator +STONE touch screen +STM32. In this project, we can choose the language and function, and draw the respiratory waveform by the way of random number triggering. When the key is pressed,...
  • ARDUINO UNO+STONE HMI+MEDICAL VENTILATOR

  • Brief Since December 8, 2019, several cases of pneumonia with unknown etiology have been reported in Wuhan City, Hubei Province, China. In recent months, nearly 80000 confirmed cases have been caused in the whole country, and the impact of the epidemic...