Close

352 Results for "N 온라인손오공게임 CDDC7닷컴 ◆프로모션번호 b77◆용산카지노㈣월드컵예선경기생중계ᇭ하노버ᇡ토토신🍋온라인손오공게임강추 luniform/"

  • Coagulator Kit - Season 2
  • Instructions     from Coagulator Kit - Season 2
  • Fill mason jar about 3/4 full of tap water. Do not use pre-filtered water or soft water. The harder the water the quicker coagulation can occur. (Optional: You can mix a drop or two of acrylic paint for added visual effect of coagulation. We recommend...

  • Add Accel
  • Instructions     from Machinechat: A Universal Sensor Hub
  • #!/usr/bin/python3 import os import time import sys accel_x_raw = open("/sys/bus/iio/devices/iio:device1/in_accel_x_raw", "r") accel_y_raw = open("/sys/bus/iio/devices/iio:device1/in_accel_y_raw", "r") accel_z_raw = open("/sys/bus/iio/devices/iio:device1/in_accel_z_raw",...

  • ESP8266 Retro Browser
  • Instructions     from ESP8266 Retro Browser
  • Software Overview In pseudo-code, the structure of  the setup routine of our simple test program will be: setup() Initialize "Serial" (UART0) for USB communication with the PC initialize "Serial1" (UART1) to link to the module. Pause to let the...

  • Use CoilScanL with an existing coil form
  • Instructions     from Inductance design tools
  • # # Make a 12uH coil using an existing 48mm form # > CoilScanL --LTarget=12 --DForm=48 --lMin=20 --lMax=250 --lInc=10 --d=1.44 --f=13.562 # CoilScan 2023-03-11 13:21 # # LTarget = 12, d = 1.44, p = 6, f = 13.562 # # DForm = 48, lMin = 20, lMax = 250,...

  • PuriBottle
  • Instructions     from PuriBottle
  • To make the screens work, you have to make the diagram below twice!!And this is the program that matches with them:// on assigne chaque led a une borne de l'arduino //const int A = 2;const int B = 3;const int C = 4;const int D = 5;const int E = 6;const...

  • A "smart" speaker
  • Instructions     from A "smart" speaker
  • I installed the actual version of raspbianwith apt install: motion fetchmail detox mplayer ripmimeHere is the link how to set the mail reception:https://www.axllent.org/docs/view/gmail-pop3-with-fetchmail/And the relevant part of motion config:#############################################################...

  • Control everything from Mathematica
  • Instructions     from Raspberry+Arduino CamTracker
  • Now it's time to track! First a few words on te arduino code: the arduino is listening to the serial port (in this case the usb cable from the pi provides power and serial to the arduino). when it receives one of the commands its moves the servo to the...

  • Things you will need
  • Instructions     from Modular PSU & Soldering station
  • Bill of materials(quantity depends on your configuration): Enclosure DPS3003/5 DualDPS3005 PSU moduleMeanwell LRS-100-24Front panel DPS3003/5 or T12 Soldering stationAS-10[IEC320 C14] SocketBS-244DSM-R Red 4mm banana socketBS-244DSM-B Black 4mm banana...

  • Free Presidential Style Hotline
  • Instructions     from Free Presidential Style Hotline
  • Python Code:import serial import subprocess ser = serial.Serial() ser.port = "/dev/ttyACM0" ser.baudrate = 9600 ser.open() value = 0 blinkcount = 10 while 1: p = subprocess.Popen(["linphonecsh", "status", "hook"], stdout=subprocess.PIPE) result = p.communicate()[0]...

  • Open Ground Penetrating Radar
  • Instructions     from Open Ground Penetrating Radar
  • Here is the schematic for the power and trigger control board. You can view it in Scheme-It. Q1 is a N-Channel MOSFET to protect against an inverted polarity power supply. I used a LM7806 and a LM7808 instead of a single LM7505 to give a faster switching...

  • MrRobot

  • Instructions     from MrRobot
  • Install a Web Server on your PiUsing wifi dongle to get on local wireless networkDownload the codesgit clone https://github.com/e-minor/RapiroWithRaspi.gitrunningpython server.py Setting on boot startup adding a shell command at rc.local# Print the IP...

  • Simon Says with DPT-Board
  • Instructions     from Simon Says with DPT-Board
  • Connect the LEDsNow that we have connected the buttons, it's time to connect the LED's. The DPT-Board outputs are powered by on-board N-FETs, this means the 'switch' is on the ground side. Thus we connect a LED as follows:After connecting the 4 LEDs...

  • JUST DO IoT
  • Instructions     from JUST DO IoT
  • The Microbit will initially display an "X", then a tick.The setup should then be working and can be seen via the TTN API for the given device addressThe device address in the following line is specific to this device. Other implementer must get a unique...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday