Close

4000 Results for "solder fume extractor"

  • Suck up all the fumes
  • Log     from SATRAN - Satellite Tracking Antenna
  • When you have 50 circuit boards to solder in a row, the fumes can get quite annoying and unhealthy. Thats why I built this very simple but efficient solder fume extractor. An old computer fan, a 3D-printed housing and two layers of an active carbon...

  • Breathe-Right
  • Log     from MultiBot CNC v2
  • So my new laser module produces a lot more smoke, that makes sense since it is much more powerful.  It is possible that I need to up my air assist game, although I did not see significant scorching on the few test cuts that I have done...

  • Prototype #2
  • Log     from Fully analog digitally controlled voltage source
  • The second prototype was soldered on a hot plate - maybe it is the reason why the accuracy is worse than for prototype #1, that was hand soldered? Another source of error in this case is the output resistor R29 - its value is 1k in this case and that,...

  • Air quality?
  • Log     from Solder Fume Extraction Station Deluxe - from scrap
  • ## Project notes 2022-11-05 (Air quality prototyping) The development of the code for the logging board has continued. It was fun having the flashing LEDs indicate the actual menu state, which is very useful. Still, it is not practical to tie up so many...

  • HACKLET 53 – QUICK TOOL HACKS
  • Log     from Hackaday.io Project
  • They say necessity is the mother of invention. Have you ever been right in the middle of a project, when you realize that you could hack up a simple tool which would make your current task easier? Maybe it’s a coil winder, or a device to hold .100 headers...

  • Fume extraction hose
  • Log     from 3D printable 125mm butterfly valve
  • I added a small guide to build a fitting solder fume extraction hose. Please see the attached pictures. You can find the build instructions incl. stl files and more pictures here: https://nerdiy.de/en/howto-3d-druck-loetrauch-absaugschlauch-inkl-trichter-selber-bauen/...

  • Hardware - revision 1
  • Log     from IuT voltmeter for a breadboard
  • The first revision of the IuT voltmeter was built using the Wemos mini prototyping system, in particular D1 mini board and matching shields: dual base, battery shield, protoboard shield.(Note 1: more about Wemos D1 mini shields - at the end of the log...

  • Hack Chat Transcript, Part 1
  • Log     from Circuit Sculpture Hack Chat
  • Hi everyone, welcome to the Hack Chat. We're excited to have @Mohit Bhoite | मोहित भोईटे today to talk about his wonderful circuit sculptures. If you haven't seen them, you should check them out at https://www.bhoite.com/sculptures/...

  • Design flaws
  • Log     from W65C02SXB investigation
  • The 65C51 UART has a bug, with no intention of fixing it.It has no FIFO buffer, which is a problem with FTDI USB chips that send up to three bytes after the hardware handshake line tells them to stop. The Flash ROM is a PLCC. Most hobbyist programmers...

  • Prototype to Launch
  • Log     from The nRF9160 Feather
  • Populating (or stuffing) circuit boards can be a messy process. It's fraught with high heat, chemicals and teeny tiny parts. What could go wrong? 😬 In this post, you’re learn how I assembled the first prototypes of the nRF9160 Feather. It's my...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday