Close
0%
0%

igaging DRO fix

Simple fix for misbehaving DRO

Similar projects worth following
DRO was working well for a few years then started to misread/jump at certain points on the scale.
Simply adding a 1uF capacitor in parallel with the existing 0.1uF capacitor seems to resolve the issue.

Will add info on DRO at later date.

Enjoy this project?

Share

Discussions

Dan Maloney wrote 09/17/2020 at 18:31 point

Interestingly simple fix. Do you think the original cap was a decoupler that just wasn't up to the job?

  Are you sure? yes | no

Thomas wrote 09/18/2020 at 05:53 point

I think you are right. The battery power source is in the display, then there is a ~1m USB cable, likely cheap thin wire, to the scale. Having 100nF at the end of that may not be enough. They sell newer models that appear to be similar design (same scale and sliding box), but likely they've fixed this issue.

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates