Here is the interfaces of the board:

- Exterior Lighting
- Interior Lighting
- Wiper Functions
- Sunroof Functions
- Air conditioning
- Gateway Functions
- Diagnosis Functions
- Alarm System
- Motor control drivers for mirrors, wiper, windows, seat position, dome, locks, and climate control
- 9-32 V Power Input
9V Under Voltage Protection
32V Over Voltage Protection
50A Input Current Protection
- Input Protection Circuitry
- 2 x CANBUS 2.0B
- 12 Input or Output Configurable Industrial IO
- Audio Amplifier 16Watt @ 12V
- 14 x 9A PWM High side driver
- 2 x Half Bridges outputs 9A (Detects open load)
- 1 x 20kHz PWM
- 3 x Analogue Inputs (Temperature sensors, Variable resistors, Proximity Sensors)
- 1 x Tacho Input
- Onboard Flash Memory
- Onboard SDcard
- RTC
- Circuitry allows continuous 50A
- CANbus J1939 Boot loading
- Windows software should create files to load onto hardware via CAN J1939

Pls, ping me if you wanna ask, umtkyck@gmail.com