We have used Creality's Ender 3 V2 which has a bed size of 220mm*220mm and settings for slicing software (Cura in my case are as follows) along with other  information:

Bed Temperature: 60℃ (Room temperature is 11℃ )

Nozzle Temperature: 205℃ 

Support: No

Material: Red PLA+

Layer height: 0.2mm

Speed: 50mm/s

Retraction distance: 10mm

Retraction speed: 50mm/s

Build plate adhesion: None

Infill: 20%

Nozzle size: 0.4mm

Nozzle material: Brass                 

Time: 1hr 45 min

Material used: 12g

If you still need any help, let us know & don't forget to SUBSCRIBE to our Crowd Supply campaign for the Open Upcell project.