Quantity   Component name
1 × ESP32 development board Should be one of the WROOM or WROVER series with at least 2 Cores + 384kB SRAM + 4MB Flash
1 × Diffused RGB LED Get as many as you'd like in your project - https://www.adafruit.com/product/159
4 × Male-to-Male jumper wires Other jumper wire types are fine if you're using a breadboard for the components
1 × USB data cable It will be used to connect the development board and your computer, as well as power from the USB battery later
1 × USB battery Any size that fits in your container for all the components
1 × Container to hold the components and battery I used a cardboard box with "On Air" cut out