Follow few steps to build your first device with Z-Uno. You will need a computer (to install Arduino IDE) and components required for your Z-Uno device.

We also suggest to start by looking on the Z-Uno quick introduction and the Z-Uno Quick Start Guide.

Z-Uno require specific version of Arduino IDE. You also need to install Z-Uno package from Board Manager.

Follow a more detailed manual 

Arduino IDE is used for both: upgrade your Z-Uno and program Z-Uno sketches.

Download the driver from our web site: Z-Uno driver for Windows

You can load examples provided by us (all examples are also evailable from Aduino IDE via File → Examples → Z-Uno), modify them or start writing your own code. For more information on syntax please visit Language Reference page.

To fully benifit from Z-Uno you need to add Z-Uno in in your Z-Wave network (also known as Inclusion process).

On Z-Uno board press three times Service Button.

1. If you experience problems with Z-Uno, please have a look on our Troubleshooting page.

If you experience problems with Z-Uno, please have a look on our Troubleshooting page.