Close
0%
0%

Sprintlab : Vagara and Eye of the tiger

Our first week in an open-lab to create a low-tech microscope controlled by CD Rom stepper and its laser-cut tiger.

clmence-labarreClémence Labarre
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
134 views
1 comments
0 followers
View Gallery

During the common week, one of the tasks that was assigned to us was making a totem animal. Our group had to conceive a mammal so we chose the tiger as a symbol of power and courage. We found a 3D model, we sliced it up with 123Make in order to use the laser cutter. After 20 minutes into the ruthless machine, our tiger was ready to be assembled with wood glue. Finally, we gave a soul to Vagara adding some LEDs for tiger's eyes.

During this week, we also had to prototype a microscope x15 microscope that would move on the Z and X axis using Arduino controlled CD Rom stepper. We disassembled 2 CD player to keep the stepper, we wired the installation with a joystick and an Arduino according to operating instructions. We made the final setup taking care to keep the different wood platforms straight.

TO BE CONTINUED ...

Our team : Julie, Gabriel and Clémence
Credit : So many thanks to Kevin and Daniel for their help and patience.

Fichier_000.mov

Presentation of Arduino controlled CD Rom steppers that will move the platforms on Z and X axis.

quicktime - 29.17 MB - 09/17/2017 at 19:26

Download

  • 1 × Cardboard-Tiger 6 mm - 60x30cm
  • 1 × Wood glue - Tiger
  • 2 × CD Rom Stepper - Microscope 5 V, 2 A
  • 1 × Arduino Leonardo - Microscope
  • 1 × Set of wires - Microscope male-female and male-male

View all 9 components

Enjoy this project?

Share

Discussions

techzone1598316 wrote 06/01/2023 at 09:26 • point

We recognise the value of a quick and easy account setup procedure.
 We work to make it as quick and simple as we can because of this. We promise that within 48 hours of receiving an accomplished <a href="https://www.cashdiscount360.com/">.Cash Discount</a> electronic application from you, your account will be set up and prepared to accept credit card payments.

  Are you sure? yes | no

Similar Projects

Using an Arduino and a pair of servos to create a laser show on a sheet of luminous vinyl.
Project Owner Contributor

Laser Galvo: Arduino Controlled

robivesrobives

Track simple objects using a webcam, Arduino and a laser
Project Owner Contributor

Arduino + OpenCV Laser Tracking

adam-oakleyAdam Oakley

a running animation on a spinning skirt
Project Owner Contributor

Skirt Chaser, zoetrope skirt

tricia-mclaughlinTricia McLaughlin

open source circular knitting machine replicable with digital fabrication and makers' tools.
Project Owner Contributor

Circular Knitic

varvara-guljajevavarvara guljajeva

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Sprintlab : Vagara and Eye of the tiger ", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.