Quantity | Component name | |
6 | × | IN-14 Neon gas based digital display Nixie Tube. |
5 | × | Neon Bulb Will be used as Decimal Points between each of the Nixie Tubes. |
1 | × | K155ID1 This is the Nixie Driver IC. It can take a minimum of 2v for logic 'high', and switch the 170v needed for the Nixies. |
1 | × | HV Module v1 [PV Electronics] Takes in 12v and boosts to 170v. |
6 | × | IN-14 Tube Cell v2 A break-out board for IN-14 Nixie Tubes. |
6 | × | 2x6 Pin Header Used with the Tube Cell |
6 | × | 2x6 Pin Socket Used with the Tube Cell |
11 | × | MPSA42 NPN MOSFETs used to switch the Nixie Tubes and Neon Lamps |
6 | × | MPSA92 PNP MOSFETs used to switch the Nixie Tubes |
1 | × | Raspberry Pi 2 |
1 | × | Adafruit Perma-Proto HAT |
1 | × | 16x2 LCD Display |