Quantity   Component name
2 × 1000LM 1,000 Lumen LED SQ2WA from eBay Main lighting LED's
1 × DC-DC Step Up Boost 4.5V-32V to 5-42V 6A Power Apply High-Power icstation (May now be 8 Amp) Boost 15 Votlts PSU to 30 Volts for the main Lighting LED's
1 × Rocker Switch KCD1-101 250 Volts A.C. Switch 2 Pin 10x icstation Stiches for main lighting LED's
1 × Heat sinks for 1000LM 1,000 Lumen LED SQ2WA from eBay Heat sinks are a MUST do for these main lighting LED's
1 × Heat sink for the boost converter I used an old CPU Heat sink Make sure the boost converter says cool
1 × Thermal Paste For heat sinks
1 × Nuts and bolts for LED and Heat sink Fasten wood together, etc...
1 × Two core cable. 30 Volts 2 Amps Supply power supply to lights, tec..
1 × Wood For stand to put main light LED onto
1 × Wing nuts and bolts for wood adjuster. Allow Adjust LED angles
1 × Old paint pot's part filled as weighed base Main LED lighting stand weigh down the stand.
1 × Hot Glue, to steady the head sinks etc. Glue parts where needed
1 × Solder to suit. Electrically connect wires
1 × Straw Hat LED's Used for camera ring light
1 × Cardboard for ring lights Cardboard for ring lights support Straw Hat LED's
1 × Small amount of concrete Small amount of concrete put into the pain pot weigh down the stand.
1 × Dtemel type tool For filing cutting, etc...