Quantity   Component name
1 × PCB 1oz copper clad
1 × LED cover (top) milled from clear polycarbonat
1 × LED cover (bottom) milled from clear polycarbonat
1 × piece of kapton tape or thermal compound for attaching thermistor
2 × M2 screw length depends on LED cover config
2 × M2 nut
1 × thermo fuse MTS 133 switching temperature 133 °C, øxl = 4x12 mm [Ftemp]
2 × SMD LED 0805 [LED1/LED2]
1 × SMD resistor 0805 2 kΩ [Rled]
1 × Picofuse 0,063 A http://cdn-reichelt.de/documents/datenblatt/C400/PICO_ESK.pdf [Fled]
1 × thermistor of your choice
1 × 5x20mm 3A slow blow fuse
5 × cable lug M3
5 × conductive aluminium/brass M3 screw
5 × conductive aluminium/brass M3 nut
5 × piece of shrinking tube to insulate cable lugs
1 × piece of power wire for bridging min. AWG 24
1 × power connection wires min. AWG 24
1 × thermistor connection wires
1 × 5x20mm cable current fuse holder