570 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

The Dragon Lantern
Hacker page by Stefan-Xp
I'm sorry i was really lazy the last time but i promise i will add some new pages or Project/Logs soon. I had to do a little project on the behalf of my comrades. It is a Lantern which resembles the coat of arms of the town where i live. I got the Lantern...

Tips for Creating High-Quality Printed Circuit Boards by PCBWay
Hacker page by Abid Jamal
Are you trying to build a printed circuit board? And are you trying to create a seamless, error-free high-quality one at that? There is so much that can go wrong if you don’t know what you’re doing, and if you’re a beginner you want to do your research. ...

Hacker
Hacker page by AMIT KAUSHIK
DESCRIPTIONA gradually improving attempt to make a useful pcb mill out of a printer and other assorted garbage, with a minimal budget and no fancy tools. It works!, but let's see how much better it can be.DETAILSNOTE: This project is gradually improving....

10-layer PCB Fabrication: How to Get the Best Printed Circuit Boards
Hacker page by Sam
Every published circuit board has a selected characteristic for one of a kind packages and digital gadgets. Most of those digital packages require excessive thermal growth residences. One PCB that gives lesser sign loss and better frequency distribution...

How to drill hole in pcb at home?
Hacker page by Sam
Drilling a hole in a printed circuit board (PCB) at home can seem intimidating, but with the right tools, it can be a relatively simple and straightforward process. Thankfully, you don’t need a lot of complex or expensive equipment to make a professional-looking...

Assembling densely populated PCBs with 0201 components
Hacker page by Christoph
I recently assembled a tiny 7.5 x 9.5 mm PCB (actually two) with 0201 passives, LEDs, a BGA and a nasty LGA. Components on both sides. It was difficult, and I was not sure if could do it, but it went well with the right tricks and some experimentation....

Replacing Lenovo laptop lithium batteries
Hacker page by ClimbinElectronics
The battery in my Lenovo laptop were slowly losing charge. Remaining capacity was 69% (good score after 2,5 years) but I need the really long battery time while travelling. The battery statistics according to Lenovo power utility:So, I bought some...

Some stuff I do
Hacker page by rob
Nature photographyMotorhome buildingLiving on the roadArduino-based designsPCB designSchematic captureFirmware

Bio-Metric Time Clock
Hacker page by gvigelet
The Bio-Metric Time Clock features a 4.3" color touchscreen display, 3G cellular capabilities, silicon fingerprint sensor, accelerometer, and GPS. This project has a custom PCB to provide the functionality needed for the features of this device...

PCB 3d printer
Hacker page by malin_iulian
helloLets all put our heads together and make this true.I have sketched a few ideas on what this printer should do:-create traces - this could be achieved with standard copper strands from electric cables - flexible enough...

Brainstorming an Open Bicycle Computer
Hacker page by davedarko
So I took my bicycle out to my parents, about an hour ride and I noticed that it's quite embarrassing as a tinkerer not having my own arduino based bycicle computer. I've looked around the web and could not find something satisfying to start with, only...

Nrf24l01 SMA connector mod
Hacker page by KingOfKYA(Travis K. )
I cut the pcb just above the bottom of the zig zag pcb antenna, remove the copper going from the signal line and ground, then scap the soldermask off near the passives, that is also a grounded point.On the revers side scrape off the soldermask...

SparkFun Shipment Review
Hacker page by CompuCat
I thought I might as well share my thoughts on some new stuff I got from SparkFun.First up: the 50 watt soldering station. Apart from the metal dome for the brass sponge in the iron holder being loose, it's a solid iron. Adjustable temperature, fine...

electronica 2014
Hacker page by Stefan-Xp
Welcome to the e!After visiting the HaD Munich Event i also had the chance to attend the Electronica. As followed there are some impressions :) In reality there was much more to see and do and loot ;-)No electronics but impressive construction site vehicle...

General status and tools
Hacker page by Jantteri
List of projects started or TODO:- Arduino Blindshutter (half made but then left it because it was boring, may get done it one day)- ESP8266 boards. Problem at the moment with USB-RS232 adapters. Lack of power shouldn't be the issue. CP2102 chip couldn't...

1
2
3
4
5
>
>|